Konica Minolta bizhub FK-503 User Manual page 122

7
7.9
Transmitting at a Designated Time
A document scanned into the memory can be transmitted at a designated
time.
Transmitting at a Designated Time
0 When using time designated transmission, up to 200 transmissions can
be stored for transmission.
0 Time designated transmission cannot be set at the same time as real-
time transmission and priority-TX.
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [Set 2], and then [Timer TX Set-
ting].
4
Specify the transmission time, and
then press [Enter].
– To release the setting, press
[OFF]. You return to the fax
screen.
– "Hour" and "minute" of the time
to start communication are dis-
played in the 24-hour style, and
entered in two digits.
Press [Hour] or [Minute], and then use the keypad to type in the desired
time.
5
Designate the destination. Set the original document.
6
Press [Start].
The FK-503 reads the document and holds it in memory until the spec-
ified time when transmission starts.
7-18 bizhub 350/250