Printing flow ................... 2-5 Operating environment ..............2-7 Connectable computers and operating systems ......2-7 Connectable interfaces ..............2-8 Connection diagram............... 2-9 Setting up the system ..............2-10 To set up the printing system ............2-10 bizhub 350/250 (Phase 2.5) Contents-1...
Page 4
Accessing PageScope Web Connection........4-11 To access PageScope Web Connection ........4-11 Windows printing................4-12 Operations on this machine ............4-12 Printer driver settings..............4-15 For Windows 98 SE/Me ..............4-15 For Windows 2000/XP/NT 4.0/Server 2003........4-15 Contents-2 bizhub 350/250 (Phase 2.5)
Page 5
For Mac OS X................4-43 For Mac OS 9.2................4-44 Various printing methods Printing operations ................5-3 For Windows .................. 5-3 Test printing ................... 5-5 For Macintosh ................5-6 For Mac OS X................. 5-6 For Mac OS 9.2................5-8 bizhub 350/250 (Phase 2.5) Contents-3...
Page 6
Saving a custom size ..............6-8 Selecting the paper source............. 6-9 Setting the paper source of the paper type........6-9 Specifying duplex/booklet printing ..........6-11 Printing multiple pages on one page (N in 1)........ 6-12 Contents-4 bizhub 350/250 (Phase 2.5)
In order to ensure that this machine is used safely, carefully read "Installation and Operation Precautions" in the User manual [Copy Operations] before using the machine. The illustrations used in this user manual may differ from the actual model. bizhub 350/250 (Phase 2.5)
"low-power mode" after a period of inactivity. An ® ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. bizhub 350/250 (Phase 2.5)
Welcome Trademarks and copyright KONICA MINOLTA, the KONICA MINOLTA logo, and The essentials of imaging are registered trademarks of KONICA MINOLTA HOLDINGS, INC. PageScope and bizhub are registered trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES. Netscape Communications, the Netscape Communications logo, Netscape Navigator, Netscape Communicator, and Netscape are trademarks of Netscape Communications Corporation.
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@crypt-Soft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). bizhub 350/250 (Phase 2.5)
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT bizhub 350/250 (Phase 2.5)
Page 20
This user manual may not be reproduced in part or in full without permission. Konica Minolta Business Technologies, Inc. will not be held liable for any incidents caused by using this printing system or user manual. Information included in this user manual is subject to change without notice.
Welcome Software licence agreement This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host Software"), and related explanatory written materials...
Page 22
U.S. Government End Users acquire the Software with only those rights set forth herein. 12. You agree that you will not export the Software in any form in violation of any applicable laws and regulations regarding export control of any countries. 1-10 bizhub 350/250 (Phase 2.5)
Welcome About this user manual This user manual contains information for using the printing functions of the Konica Minolta printer controller. For details on the copy functions, scanning functions, box functions, and fax functions, refer to the respective user manual.
Text formatted in this style provides additional assistance. % Text formatted in this style describes the action that will ensure the desired results are achieved. 1-12 bizhub 350/250 (Phase 2.5)
Text highlighted in this manner contains references for more detailed information. Special text markings [Copy] key The names of keys on the control panel are written as shown above. MACHINE SETTING Display texts are written as shown above. bizhub 350/250 (Phase 2.5) 1-13...
(using a Web browser) - Control of the number of pages printed ("User Authentication" and "Account Track" function, excluding external server authentication) Note Only the PCL printer driver can be used with Windows printing. bizhub 350/250 (Phase 2.5)
To use the extra scan function, optional fax kit or scanner unit is required. [Box] Switches to the box mode. Detail You can use this machine as a printer in all modes. Change the default print settings in the Utility mode. bizhub 350/250 (Phase 2.5)
IPX/SPX, or AppleTalk) when this machine is used as a network printer. The printer controller then performs image rasterization (development of output characters and images to bitmap data). Finally, this data is printed from this machine. bizhub 350/250 (Phase 2.5)
Page 32
SPX or AppleTalk Machine Print Printer controller PS/PCL processing (rasterizing) When a print job is received during copying, the data is stored in the memory of this machine. When copying is complete, the print job is automatically printed. bizhub 350/250 (Phase 2.5)
Mac OS 9.2, Mac OS X 10.2, Mac OS X 10.3, or Mac OS X 10.4 Processor PowerPC, Intel Processor Memory Capacity recommended for the operating system Drive CD-ROM Web browser Netscape Navigator 7.0 (when using PageScope Web Connection) bizhub 350/250 (Phase 2.5)
The USB interface can be connected to a computer running Windows. A USB cable is required for connection. Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring 3 meters or less is recommended. bizhub 350/250 (Phase 2.5)
The printer cables can be connected to each port at the back of this machine. Machine (rear view) Ethernet (10Base-T or 100Base-TX) cable Parallel cable Parallel port Note To connect this machine to a computer using a parallel connection, optional local interface kit is required. bizhub 350/250 (Phase 2.5)
Detail For details on connecting this machine to a computer, refer to "Connectable interfaces" on page 2-8. 2-10 bizhub 350/250 (Phase 2.5)
Page 37
If using the optional parallel interface, set the interface time settings and mode (Compatible, Nibble, or ECP) as necessary with the PageScope Web Connection and on the control panel. For details, refer to "Print tab - Local I/F" on page 11-68. bizhub 350/250 (Phase 2.5) 2-11...
Mac OS 9.2 or later, Mac OS X 10.2, Mac OS X 10.3, and Mac OS X 10.4 * The User Software CD-ROM contains the PCL printer driver, and the PostScript Printer Driver CD-ROM contains the PostScript drivers. bizhub 350/250 (Phase 2.5)
"For Windows XP/Server 2003" on page 3-13 USB connection "Installing the printer driver using Plug and Play" on page 3-9 "For Windows 98 SE" on page 3-9 "For Windows Me/2000" on page 3-10 "For Windows XP/Server 2003" on page 3-12 bizhub 350/250 (Phase 2.5)
Page 43
The printer driver can be installed using the Add Printer Wizard, however, if used, the Plug and Play screen will appear each time the computer is started. To connect this machine to a computer using a parallel connection, the optional local interface kit is required. bizhub 350/250 (Phase 2.5)
64 MB or more (128 MB or more recommended) * With Windows NT 4.0, in order to install a machine that is connected directly to a network using the TCP/IP protocol, Microsoft TCP/IP Printing Service must first be installed on the computer being used. bizhub 350/250 (Phase 2.5)
When the setup selection dialog box appears, click the [Install Printer] button, and then click the [Next] button. The connected printers and copiers are detected. Select this machine and proceed with the installation. Follow the on-screen instructions to complete the installation. bizhub 350/250 (Phase 2.5)
Page 46
If the connection of this machine cannot be recognized or for parallel connections, the machine will not be listed. When this occurs, select "Specify the Printer/MFP Except for the Above. (IP Address, Host Name...)", and then select the print from the box. bizhub 350/250 (Phase 2.5)
ROM drive. – Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD- Click the [Next] button. Select "Search for the best driver for your device (Recommended)", and then click the [Next] button. Select "Specify a location", and then click the [Browse] button.
– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD- Select "Search for a suitable driver for my device (recommended)" (for Windows Me, select "Automatic search for a better driver (Recommended)"), and then click the [Next] button.
Page 49
Installing the printer driver When installation is complete, make sure that the icon of the installed printer appears in the Printers window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. bizhub 350/250 (Phase 2.5) 3-11...
– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD- Select "Install from a list or specific location (Advanced)", and then click the [Next] button. Under "Search for the best driver in these locations", select "Include this location in the search", and then click the [Browse] button.
– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD- Click the [Start] button, and then click "Printers and Faxes". – If "Printers and Faxes" does not appear in the Start menu, open the Control Panel from the Start menu, select "Printers and Other...
Page 53
When installation is complete, make sure that the icon of the installed printer appears in the Printers and Faxes window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. bizhub 350/250 (Phase 2.5) 3-15...
ROM drive. – Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD- Click the [Start] button, point to "Settings", and then click "Printers". The Printers window appears. Double-click the "Add Printer" icon. The Add Printer Wizard starts up.
Page 55
"Driver\PS-PPD" folder – For Windows 2000 Konica Minolta PCL driver: User Software CD-ROM "Driver\Drivers\350_250_200" folder Konica Minolta PostScript driver: PostScript Printer Driver CD- ROM "Driver\Drivers\350_250_200" folder – For Windows NT 4.0 Konica Minolta PCL driver: User Software CD-ROM "Driver\Drivers\350_250_200" folder Konica Minolta PostScript driver: PostScript Printer Driver CD- ROM "Driver\Drivers\350_250_200"...
Page 56
Installing the printer driver When installation is complete, make sure that the icon of the installed printer appears in the Printers window. Remove the CD-ROM from the CD-ROM drive. This completes the printer driver installation. 3-18 bizhub 350/250 (Phase 2.5)
On the Deletion Confirmation dialog box, click the [Yes] button. Close the Print Server Properties dialog box and Printers window (for Windows XP/Server 2003, "Printers and Faxes" window). Restart the computer. This completes the uninstallation procedure. bizhub 350/250 (Phase 2.5) 3-19...
Page 58
Check the "C:\WINDOWS\system32\spool\drivers\w32x86" folder and delete the folder of the corresponding model if it is available. If the Konica Minolta PCL driver and Konica Minolta PostScript driver are both installed, the model information of both drivers is deleted. If one driver is remaining, do not delete it.
– For the administrator’s name and password, ask your network administrator. – To quite the installation, click the [Cancel] button. Click the [Continue] button and follow the on-screen instructions until the Installation dialog box appears. bizhub 350/250 (Phase 2.5) 3-21...
Page 60
[Installation] button may appear as the [Upgrade] button. The printer driver is installed onto the Macintosh computer. When installation is complete, a message appears. Click the [Close] button. This completes the printer driver installation. Next, select the printer. 3-22 bizhub 350/250 (Phase 2.5)
If usable printers have already been set up, the Add Printer dialog box does not appear. If this machine appears as a printer for AppleTalk connection, select "KONICA MINOLTA" in "Print Using", select "KONICA MINOLTA 350/250/200PS" from the Model list, and then click the [Add] button. –...
Page 62
The following procedure is an example of when AppleTalk was selected by the connection method. Select "KONICA MINOLTA" from the "Printer Model" drop-down list. Select "KONICA MINOLTA 350/250/200 PS", and then click the [Add] button. The selected printer is registered in the printer list.
Page 63
If a different PPD file has already been selected, click the [Setup] button in step 6, and then click the [Select PPD] button from the screen that is already displayed. The PostScript printer description (PPD) file selection screen appears. bizhub 350/250 (Phase 2.5) 3-25...
Page 64
The setting screen for adding Options appears. Select the options that are installed on this machine from "Options Installed 1" and "Options Installed 2". Click the [OK] button. The Chooser window appears again. Close the Chooser window. 3-26 bizhub 350/250 (Phase 2.5)
KONICAMINOLTA350 Security.plugin – KONICAMINOLTA350 Setup.plugin For Mac OS 10.2, drag the following folders, which are located in "Library"-"Printers"-"PPD Plugins", to the "Trash" icon. – KONICAMINOLTA350 Finishing.plugin – KONICAMINOLTA350 ImageLayout.plugin – KONICAMINOLTA350 Security.plugin – KONICAMINOLTA350 Setup.plugin bizhub 350/250 (Phase 2.5) 3-27...
Page 66
For Mac OS 10.2, enter "/usr" in "Move to"-"Move to folder", move it to the "/usr" folder, and then drag the "pstokm350" folder, which is located in "libexec"-"cups"-"filter", to the "Trash" icon. Restart the Macintosh computer. This completes the uninstallation procedure. 3-28 bizhub 350/250 (Phase 2.5)
For Mac OS 9.2 Drag PPD file "KONICAMINOLTA350Vxxx.ppd", which is located in "System Folder"-"Extensions"-"Printer Descriptions" of "Hard Disk", to the "Trash" icon. The related printer driver files are deleted. Restart the Macintosh computer. This completes the uninstallation procedure. bizhub 350/250 (Phase 2.5) 3-29...
Only the PCL printer driver can be used with Windows printing. Note When setting up the network, the administrator password is required to enter Administrator mode. Ask the administrator of this machine for the administrator password. bizhub 350/250 (Phase 2.5)
Windows XP. Windows 98 SE and Windows Me cannot be used. Detail LPR (Line Printer Request): This print request system can be used under Windows NT 4.0, Windows 2000, or Windows XP. The queue name is input as "Print". bizhub 350/250 (Phase 2.5)
Page 73
You can print from your Macintosh computer using LPR or AppleTalk. You can connect this printing system to a print server in an AppleTalk environment and send print jobs from the Macintosh computer to this machine. bizhub 350/250 (Phase 2.5)
TCP/IP Port 9100 TCP/IP printing * When using Port 9100 printing under Windows 98 Second Edition or Windows Me, the Peer to Peer Printing Tool must be installed. For the details, refer to the table below. bizhub 350/250 (Phase 2.5)
Page 75
For an IPP connection, it is necessary to install the printer driver first. Only the PCL printer driver can be used with Windows printing. If network printing with the PostScript printer driver, use LPR printing or Port 9100 printing. bizhub 350/250 (Phase 2.5)
Page 76
Setting up network printing Network printing in a NetWare environment NetWare version Protocol used Emulation Service mode NetWare 4.x NDS/Bindery Pserver/Nprinter NetWare 5.x/6 Pserver TCP/IP NDPS(lpr) bizhub 350/250 (Phase 2.5)
Touch [Admin. 2]. Touch [Network Settings]. – If the [Network Setting 1]/[Network Setting 2] selection screen appears, touch [Network Setting 1]. Touch [Basic Settings]. Touch [IP Address Settings]. Enter the IP address, and then touch [Enter]. bizhub 350/250 (Phase 2.5)
Page 78
If "DHCP Configuration" has been set to "Auto-Obtain", it is recommended that the IP address assigned to this machine be fixed in the DHCP server settings. 4-10 bizhub 350/250 (Phase 2.5)
Example: If the IP address for this machine is 192.168.1.20 http://192.168.1.20/ The initial page of PageScope Web Connection appears. Detail For further details on PageScope Web Connection, refer to "Using PageScope Web Connection" on page 11-30. bizhub 350/250 (Phase 2.5) 4-11...
"Setting the IP address for this machine" on page 4-9. In PageScope Web Connection, specify the settings described below for Windows printing. Start up PageScope Web Connection. Enter the administrator password, and then click [Log-in]. 4-12 bizhub 350/250 (Phase 2.5)
Page 81
Spaces, backslashes (\), and commas (,). – WorkGroup Name:Specify the work group name. Up to 15 alphanumeric characters can be used, excluding the following characters. \ * + = | : ; “ ? < > ,. bizhub 350/250 (Phase 2.5) 4-13...
Page 82
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. 4-14 bizhub 350/250 (Phase 2.5)
Enter the same NetBIOS name and printing service name that you entered in PageScope Web Connection. For the setting procedure, refer to "Operations on this machine" on page 4-12. Click the [Close] button to apply the setting. bizhub 350/250 (Phase 2.5) 4-15...
[Next] button. Select "Custom", and then click the [Settings] button. Select "LPR", enter "Print" in the "Queue Name" box. – The uppercase letters and lowercase letters must be entered correctly. 4-16 bizhub 350/250 (Phase 2.5)
Page 85
For Windows XP, select "LPR Byte Counting Enabled", and then click the [OK] button. – If "LPR Byte Counting Enabled" is not selected, the data may not be printed. Click the [Next] button, and then click the [Finish] button to apply the setting. bizhub 350/250 (Phase 2.5) 4-17...
Compatible Printer dialog box, enter the IP address for this machine. In the "Name of printer or print queue on that server" box, enter "Print". – The uppercase letters and lowercase letters must be entered correctly. Click the [OK] button to apply the setting. 4-18 bizhub 350/250 (Phase 2.5)
When the Add Standard TCP/IP Printer Port Wizard starts up, click the [Next] button. In the "Name of printer or IP address" box, enter the IP address for this machine, and then click the [Next] button. Select "Custom", and then click the [Settings] button. bizhub 350/250 (Phase 2.5) 4-19...
Peer Printing Tool, all printer drivers connected to the network with the Peer to Peer Printing Tool can no longer be connected to the network if the Peer to Peer Printing Tool is uninstalled. 4-20 bizhub 350/250 (Phase 2.5)
Right-click the icon of the installed printer, and then click "Properties". On the Details tab, click the [Add Port] button. Click "Others", select "KONICA MINOLTA Peer to Peer Port" from the list, and then click the [OK] button. The Peer to Peer setup dialog box appears. The printer connected to the network is automatically detected.
"Setting the IP address for this machine" on page 4-9. Also, specify the IPP printing settings in PageScope Web Connection. (Printing can be performed with the default settings.) Start up PageScope Web Connection. Enter the administrator password, and then click [Log-in]. 4-22 bizhub 350/250 (Phase 2.5)
Page 91
Printer URI: The URI of the printer that can be used for IPP printing is displayed. – Enable IPP: Set whether to perform IPP printing. Select "Enable" here. – Accept IPP Jobs: Set whether to use the IPP reception function. – Operations-Supported: Specify print operations supported by IPP. bizhub 350/250 (Phase 2.5) 4-23...
Page 92
Printer Name: Specify the printer name (up to 127 alphanumeric characters and symbols). – Printer Location: Specify the printer location (up to 127 alphanumeric characters and symbols). – Printer Information: Specify the printer manufacturer details (up to 127 alphanumeric characters and symbols). 4-24 bizhub 350/250 (Phase 2.5)
– Konica Minolta PCL driver: User Software CD-ROM – Konica Minolta PostScript driver: PostScript Printer Driver CD- For Windows 2000, click the [Start] button, point to "Settings", and then click "Printers". For Windows XP/Server 2003, click the [Start] button, and then click "Printers and Faxes".
Page 94
– Konica Minolta PCL driver: User Software CD-ROM "Driver\Drivers\350_250_200" folder – Konica Minolta PostScript driver: PostScript Printer Driver CD- ROM "Driver\Drivers\350_250_200" folder Check that the printer name is displayed in the "Printers" list, and then click the [Next] button. Select whether to set the printer as the default printer, and then click the [Next] button.
Click the [Esc] button to quit Pconsole. Use the NetWare server console to load PSERVER.NLM. For queue user privileges, printer notification option, assignment of multiple queues, and passwords, refer to the NetWare documentation, and specify settings as necessary. bizhub 350/250 (Phase 2.5) 4-27...
Page 96
Pserver. – Print Queue Scan Rate: Specify "1". (Change as necessary.) – Mode: Select "Nprinter/Rprinter". – Printer Number: Specify "255". (Set the number assigned to the printer (0 to 254) or 255.) 4-28 bizhub 350/250 (Phase 2.5)
Page 97
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. bizhub 350/250 (Phase 2.5) 4-29...
Enter the appropriate names in the "Printer Server Name", "Printer Name", "Print Queue Name", and "Print Queue Volume" fields, select "Other/Unknown" from the "Printer type" field, and then save the specified settings. Click the [Esc] button to quit Pconsole. 4-30 bizhub 350/250 (Phase 2.5)
Page 99
Pserver. – Print Queue Scan Rate: Specify "1". (Change as necessary.) – Mode: Select "PServer". – Printer Number: Specify "255". (Set the number assigned to the printer (0 to 254) or 255.) bizhub 350/250 (Phase 2.5) 4-31...
Page 100
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. 4-32 bizhub 350/250 (Phase 2.5)
"Other/Unknown" from the "Printer type" field, and then save the specified settings. For queue user privileges, printer notification option, assignment of multiple queues, and passwords, refer to the NetWare documentation, and specify settings as necessary. bizhub 350/250 (Phase 2.5) 4-33...
Page 102
Preferred NDS Context: Specify the name of the context that connects to Pserver. – Preferred NDS Tree: Specify the name of the tree that Pserver logs on to. – Print Queue Scan Rate: Specify "1". (Change as necessary.) – Mode: Select "Nprinter/Rprinter". 4-34 bizhub 350/250 (Phase 2.5)
Page 103
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. bizhub 350/250 (Phase 2.5) 4-35...
"Other/Unknown" from the "Printer Type" field, and then click the [Create] button. For queue user privileges, printer notification option, assignment of multiple queues, and passwords, refer to the NetWare documentation, and specify settings as necessary. 4-36 bizhub 350/250 (Phase 2.5)
Page 105
Preferred NDS Context: Specify the name of the context that connects to Pserver. – Preferred NDS Tree: Specify the name of the tree that Pserver logs on to. – Print Queue Scan Rate: Specify "1". (Change as necessary.) – Mode: Select "PServer". bizhub 350/250 (Phase 2.5) 4-37...
Page 106
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. 4-38 bizhub 350/250 (Phase 2.5)
The printer driver registration screen appears. Select "None" for each operating system to complete the registration. Note For settings for the queue user rights, printer notification option, assignment of multiple queues, and passwords, refer to the NetWare documentation, and set them as necessary. bizhub 350/250 (Phase 2.5) 4-39...
"Setting the IP address for this machine" on page 4-9. In the PageScope Web Connection, specify the settings described below for AppleTalk. Start up PageScope Web Connection. Enter the administrator password, and then click [Log-in]. bizhub 350/250 (Phase 2.5) 4-41...
Page 110
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. 4-42 bizhub 350/250 (Phase 2.5)
"Make AppleTalk Active" check box is selected. Click the close button at the top left of the dialog box. The "Apply configuration changes?" message appears. Click the [Apply] button. The AppleTalk and Ethernet settings are saved. bizhub 350/250 (Phase 2.5) 4-43...
Page 112
Macintosh computer that is connected to the network, and then set the IP address and subnet mask. Click the close button at the top left of the dialog box. The "Save changes to the current configuration?" message appears. Click the [Save] button. 4-44 bizhub 350/250 (Phase 2.5)
The Print dialog box differs depending on the application. Specify the page range and the number of copies to print. – For the PPD driver, the settings specified on this machine have precedence if multiple copies are specified in "Default Set" of this machine. bizhub 350/250 (Phase 2.5)
Page 116
Changes made to the printer driver settings on the Print dialog box are not saved. When the application is exited, the settings return to their default settings. Do not the select the "Collate" check box on the Print dialog box. bizhub 350/250 (Phase 2.5)
Check the printout, and then click the [OK] button or the [Yes] button. Note If the test page is not printed properly, check that the printer driver has been installed properly and that the network settings are complete. bizhub 350/250 (Phase 2.5)
Specify the print range and the number of copies to print, and then click the [Print] button. – The settings specified on this machine have precedence if multiple copies are specified in "Default Set" of this machine. The Data indicator of this machine flashes. bizhub 350/250 (Phase 2.5)
Page 119
The Print dialog box differs depending on the application. Do not the select the "Collated"check box on the Print dialog box. For Mac OS X 10.2.x, printing speed may be slower if the data contains colors. bizhub 350/250 (Phase 2.5)
If the printer name does not appear in the list, select the printer in the Chooser window. For details, refer to "Selecting a printer" on page 3-23. The Print dialog box differs depending on the application. The settings can be saved by clicking the [Save Settings] button. bizhub 350/250 (Phase 2.5)
Folds the printouts in half and staples. Fold Hole-Punch Punches holes in documents. Output Method For non-conventional printing, selects the (Mac (Job Manage- special output format for secured docu- OS X ment) ments or saves data in a box. only) bizhub 350/250 (Phase 2.5)
Page 122
User Authentica- Printing is performed after the registered (Mac tion user name and password are entered. OS X only) Account Track Tracks operations performed by each ac- (Mac count. OS X only) 5-10 bizhub 350/250 (Phase 2.5)
Script page 6-7. PostScript PPD "Specifying the Paper tab settings" on page 8-6. Mac OS X PostScript PPD "Page Attributes (basic settings)" on page 10-8. Mac OS 9.2 "Page Attributes (basic settings)" on page 10-8. bizhub 350/250 (Phase 2.5) 5-11...
"Page Attributes (basic settings)" on page 10-8. Mac OS 9.2 "Page Attributes (basic settings)" on page 10-8. Note Only the output paper sizes can be specified with the PostScript PPD driver for Windows and the Macintosh. 5-12 bizhub 350/250 (Phase 2.5)
"Specifying the Setup tab settings" on Script page 6-7. PostScript PPD "Graphics tab" on page 8-4. Mac OS X PostScript PPD "Page Attributes (basic settings)" on page 10-8. Mac OS 9.2 "Page Attributes (basic settings)" on page 10-8. bizhub 350/250 (Phase 2.5) 5-13...
"Specifying the Setup tab settings" on Script page 6-7. PostScript PPD "Specifying the Paper tab settings" on page 8-6. Mac OS X PostScript PPD "Paper Feed" on page 10-13. Mac OS 9.2 "General (basic settings)" on page 9-11. 5-14 bizhub 350/250 (Phase 2.5)
"Specifying the Setup tab settings" on Script page 6-7. PostScript PPD "Specifying the Paper tab settings" on page 8-6. Note With the Konica Minolta PCL driver for Windows, the paper type of the paper tray can be specified. bizhub 350/250 (Phase 2.5) 5-15...
This comes in handy when you want to bind multiple-page documents. The binding area can be specified by specifying the binding position. Duplex printing Print data Printout Print data Printout Left binding Top binding Booklet printing Print data Printout 5-16 bizhub 350/250 (Phase 2.5)
Page 129
7-18. PostScript PPD "Specifying the Device Options tab settings" on page 8-7. Mac OS X PostScript PPD "Finishing" on page 10-15. Mac OS 9.2 "Printer specific options (finishing options 1 to 3)" on page 9-14. bizhub 350/250 (Phase 2.5) 5-17...
"Specifying the Paper tab settings" on page 8-6. Mac OS X PostScript PPD "Layout (printing multiple pages on one page)" on page 10-12. Mac OS 9.2 "Layout (printing multiple pages on one page)" on page 10-12. 5-18 bizhub 350/250 (Phase 2.5)
7-18. PostScript PPD "Specifying the Device Options tab settings" on page 8-7. Mac OS X PostScript PPD "Finishing" on page 10-15. Mac OS 9.2 "Printer specific options (finishing options 1 to 3)" on page 9-14. bizhub 350/250 (Phase 2.5) 5-19...
"Specifying the Setup tab settings" on page 6-7. Konica Minolta Post- "Specifying the Setup tab settings" on Script page 6-7. PostScript PPD "Specifying the Device Options tab settings" on page 8-7. Mac OS X PostScript PPD "Security" on page 10-17. 5-20 bizhub 350/250 (Phase 2.5)
-When all pages in the document are the same size. -When stapling or hole punching setting have not been specified. -When printing multiple pages (when not printing only one page). Offset (shift) Collate Offset (crisscross) bizhub 350/250 (Phase 2.5) 5-21...
Page 134
"Specifying the Device Options tab settings" on page 8-7. Mac OS X PostScript PPD "Finishing" on page 10-15. Mac OS 9.2 "General (basic settings)" on page 9-11 and "Printer specific options (finishing options 1 to 3)" on page 9-14. 5-22 bizhub 350/250 (Phase 2.5)
Various printing methods Skip Blank Pages (saving paper) Does not print blank pages in the data. Operating system Printer driver Refer to Windows Konica Minolta PCL "Specifying the Setup tab settings" on page 6-7. bizhub 350/250 (Phase 2.5) 5-23...
7-22. PostScript PPD "Specifying the Device Options tab settings" on page 8-7. Mac OS X PostScript PPD "Setup" on page 10-14. Mac OS 9.2 "Printer specific options (finishing options 1 to 3)" on page 9-14. 5-24 bizhub 350/250 (Phase 2.5)
Prints the original document on top of form data that was created separately. Form data Created data Operating system Printer driver Refer to Windows Konica Minolta PCL "Specifying the Overlay tab settings" on page 6-26. bizhub 350/250 (Phase 2.5) 5-25...
Prints a watermark (text stamp) on the page being printed. Operating system Printer driver Refer to Windows Konica Minolta PCL "Specifying the Watermark tab settings" on page 6-30. Konica Minolta Post- "Specifying the Watermark tab settings" on Script page 6-30. 5-26 bizhub 350/250 (Phase 2.5)
Refer to Windows Konica Minolta PCL "Specifying the Setup tab settings" on page 6-7. Konica Minolta Post- "Specifying the Setup tab settings" on Script page 6-7. Mac OS X PostScript PPD "Security" on page 10-17. bizhub 350/250 (Phase 2.5) 5-27...
The following printer driver setting dialog box appears. For the settings that can be specified with each printer driver, refer to the following: - Konica Minolta PCL driver: "Setting up the PCL driver" on page 6-3 - Konica Minolta PostScript driver: "Setting up the PostScript driver (Windows)"...
Page 142
To specify custom settings, click Print in the application, and then click the [Properties] or [Preferences] button on the Print dialog box. The settings specified on the Print dialog box apply only to the current file. 5-30 bizhub 350/250 (Phase 2.5)
Open the data in the application, choose "File", and then click "Page Setup" or "Paper Setup". For the settings that can be specified with each printer driver, refer to the following: - OS X: "Setting up the PPD driver (Mac OS X)" on page 10-3 bizhub 350/250 (Phase 2.5) 5-31...
Page 144
The contents of the Print dialog box and the Page Setup dialog box may differ. Depending on the application, the Page Setup dialog box can be displayed by selecting "Paper Setup"—"Options" from the "File" menu. 5-32 bizhub 350/250 (Phase 2.5)
Click this button to save the current settings and to view them at a later time. Restore Defaults Click this button to return the settings to their defaults, which were se- lected when the driver was installed. bizhub 350/250 (Phase 2.5)
Page 148
Paper Printer Note To enable any installed options, you must specify the Option settings. For details, refer to "Specifying the Option tab settings" on page 6-35. bizhub 350/250 (Phase 2.5)
Prints a watermark (text stamp) on the document being printed. Distribution Number Prints the number of the copy. Stamping Quality tab Item Function Print with Black Specifies the data to be printed in black. Pattern Selects the print pattern. bizhub 350/250 (Phase 2.5)
Specifies the options installed on this machine. Option Information Automatically specifies the printer driver option settings. Note To display the Option tab in Windows 2000/XP/NT 4.0/Server 2003, right- click the icon of the installed printer, and then click "Properties". bizhub 350/250 (Phase 2.5)
You can enlarge or reduce documents created when printing to match the output paper size. Click the Setup tab. From the "Original Size" and "Output Size" drop-down lists, select the desired settings. – You can also specify any enlargement or reduction ratio in the "Zoom" box. bizhub 350/250 (Phase 2.5)
Printers window in Windows 2000/NT 4.0 or from the Printers and Faxes window in Windows XP/Server 2003. Windows 98 SE/Me can be specified from the Properties dialog box on the print screen. bizhub 350/250 (Phase 2.5)
Setting the paper source of the paper type Follow the procedure described below to assign a paper type to a paper tray. Click the [Paper Type Settings] button. Select the "Paper Source" being changed, and then click the [Edit Paper Type] button. bizhub 350/250 (Phase 2.5)
Page 154
When the "Transparency Interleave" check box is selected, the Transparency Interleave Settings dialog box appears, allowing you to select the source of the interleaf paper. The Transparency Interleave Settings dialog box can also be displayed by clicking the [Settings] button. 6-10 bizhub 350/250 (Phase 2.5)
(two facing pages). This comes in handy when you want to bind multiple- page documents. Click the Setup tab. From the "Print Type" drop-down list, select "Duplex" or "Booklet". Note The binding orientation can be specified from the "Binding Position" drop-down list. bizhub 350/250 (Phase 2.5) 6-11...
"Details", and then change the settings in the Combination Details dialog box that appears. Note When printing a job that contains pages of different sizes and orientations, images may be missing or overlapping when the document is printed. 6-12 bizhub 350/250 (Phase 2.5)
Shift Mode in the File Margin Details dialog box, the reduction ratio according to the larger (reduction magnification) value of the file margin width is used from the values specified in Front Side/Back Side. bizhub 350/250 (Phase 2.5) 6-13...
You can fold and staple printouts in half. Click the Setup tab. Select the "Center Staple and Fold" check box. Note The Center Staple and Fold function is only available when the optional finisher and saddle kit are installed. 6-14 bizhub 350/250 (Phase 2.5)
Save in User Box and Print: Saves the document in a box and prints at the same time. – Proof and Print: After part of the document has been printed, this machine stops printing temporarily. Select to avoid misprinting large print jobs. bizhub 350/250 (Phase 2.5) 6-15...
Page 160
Secure Print are limited and jobs are deleted when a password that does not meet the password rule is entered. For the password rules, refer to User manual [Copy Operations]. For details on the box functions of this machine, refer to User manual [Box Operations]. 6-16 bizhub 350/250 (Phase 2.5)
Page 161
In User Box Number, specify the number of the box that was created. For public box, enter "1". For details on the box functions of this machine, refer to User manual [Box Operations]. bizhub 350/250 (Phase 2.5) 6-17...
Page 162
For details, refer to "Print job management" on page 11-89. Proof and Print can be specified when "Collate" is specified. For details on the box functions of this machine, refer to User manual [Box Operations]. 6-18 bizhub 350/250 (Phase 2.5)
DIP switch, the corresponding user may be locked out and denied access if the authentication information is not entered correctly. For details on user authentication and Enhance Security mode, refer to User manual [Copy Operations]. bizhub 350/250 (Phase 2.5) 6-19...
Page 164
Setting up the PCL driver Detail For user authentication settings, consult the administrator of this machine. 6-20 bizhub 350/250 (Phase 2.5)
The default password can be specified in the printer driver setup dialog box, which can be displayed from the Printers window (for Windows XP/Server 2003, Printers and Faxes window). Click the [OK] button. bizhub 350/250 (Phase 2.5) 6-21...
Page 166
When performing user authentication on the machine and Synchronize is specified, you can print by inputting the user name and password in User Authentication. For the account track details, consult the administrator of this machine. 6-22 bizhub 350/250 (Phase 2.5)
"Back Cover Page" and "Front Cover Page" at the same time. The Save in User Box, Save in User Box and Print, and Proof and Print functions cannot be specified when the "Per Page Setting" setting is specified. bizhub 350/250 (Phase 2.5) 6-23...
Click the [Add] button, and then specify the page number, print type, and paper source in the dialog box that appears. 6-24 bizhub 350/250 (Phase 2.5)
Page 169
Note For an existing list, click the [Edit] button to change the registered page numbers, or click the [Delete] button to delete them. Click to change the page number starting with the smallest page number. bizhub 350/250 (Phase 2.5) 6-25...
You must pre-register forms to be printed. For details, refer to "Editing forms" on page 6-28. Create the print data using any application. From the "File" menu, select "Print". Select the KONICA MINOLTA 350/250/200 PCL printer, and then click the [Preferences] button. Click the Overlay tab. Select "Print Overlay".
Page 171
From the list, select the form that you want to print. Select the file name, and then click the [OK] button. The Print dialog box appears again. Click the [OK] button. Overlay printing is performed. bizhub 350/250 (Phase 2.5) 6-27...
"Create Overlay", and then specify the document that you want to register. Create the form data using any application. From the "File" menu, select "Print". Select the KONICA MINOLTA 350/250/200 PCL printer, and then click the [Preferences] button. Click the Overlay tab. Select "Create Overlay".
Page 173
When the created overlay data consists of multiple pages, the first page of data is registered as an overlay. From the Overlay tab, the selected form data can be deleted by clicking the [Delete Overlay File] button. bizhub 350/250 (Phase 2.5) 6-29...
From the drop-down list, select the watermark that you want to print. Specify the desired settings for "Type" and "1st Page Only". – Overwrite: Prints the watermark with a white background. – Transparent: Prints the watermark with a transparent background. 6-30 bizhub 350/250 (Phase 2.5)
Font Settings: Specifies the font and font size. – Text Angle: Specifies the watermark print angle. – Position: Specifies the watermark position with the horizontal and vertical scroll bars. – Text Density: Specifies the watermark text density. bizhub 350/250 (Phase 2.5) 6-31...
Starting Number: Specifies the starting number. – Density: Specifies the density of the number being printed. Note The "Distribution Number Stamping" check box is not available if the "Collate" check box is not selected on the Setup tab. 6-32 bizhub 350/250 (Phase 2.5)
Click the Quality tab. Specify settings for the following: – Print with Black: Specifies the data to be printed in black. Prints in black except the white areas. – Pattern: Selects the print pattern as "Fine" or "Coarse". bizhub 350/250 (Phase 2.5) 6-33...
Using the printer fonts will shorten the printing time, however, there may be a difference in the screen display and the print results. When using TrueType fonts, select from the "Download Font Format" drop-down list the font type to be downloaded to the printer. 6-34 bizhub 350/250 (Phase 2.5)
Specifying the Option tab settings Note If the installed options are not set from the Option tab, the option function cannot be used with the printer driver. When installing options, be sure to make the proper settings. bizhub 350/250 (Phase 2.5) 6-35...
If "Printers and Faxes" does not appear in the Start menu, open the Control Panel from the Start menu, select "Printers and Other Hardware", and then select "Printers and Faxes". Right-click the "KONICA MINOLTA 350/250/200 PCL" icon, and then click "Properties". Click the Option tab.
For PCL drivers, you can save the setting values of the changed driver and recall them as necessary. Saving the driver settings Change the driver settings from the Setup tab and the Per Page Setting tab. Click the [Save/Restore Setting] button, and then select "Save Current Setting". bizhub 350/250 (Phase 2.5) 6-37...
Page 182
The file extension is ".ksf". You can save up to 25 items in the library. Up to 64 characters can be entered in the "Name" text box. Up to 512 characters can be entered in the "Comment" text box. 6-38 bizhub 350/250 (Phase 2.5)
Even if the settings file is deleted from the "Library" list, it will remain on the hard disk of your computer. By specifying the file name in "Save Setting File in Library", you can save it in the "Library" list. bizhub 350/250 (Phase 2.5) 6-39...
Page 184
Setting up the PCL driver 6-40 bizhub 350/250 (Phase 2.5)
Click this button to save the current settings and to view them at a later time. Edit Click this button to change the saved settings. Default Click this button to return the settings to their defaults, which were se- lected when the driver was installed. bizhub 350/250 (Phase 2.5)
Page 188
Paper Printer Note To enable any installed options, you must specify the Option settings. For details, refer to "Specifying the Option tab settings" on page 7-26. bizhub 350/250 (Phase 2.5)
Rotate 180 Prints the image rotated 180°. Double Sides Specifies duplex printing. Binding Position Specifies the binding position. Staple Specifies stapling. Center Staple and Fold Folds the printouts in half and staples. Hole-Punch Specifies hole punching. bizhub 350/250 (Phase 2.5)
Specifies whether to print an error report when a PostScript error dler occurs. Mirrored Output Reverses horizontally, then prints. Negative Output Reverses black and white, then prints. PostScript Pass through Allows applications to print directly without using a printer driver. bizhub 350/250 (Phase 2.5)
Fonts larger than the maximum specified size are downloaded as outline fonts. Note To display the Device Settings tab in Windows 2000/XP/NT 4.0/Server 2003, right-click the icon of the installed printer, and then click "Properties". bizhub 350/250 (Phase 2.5)
Use Print Server Properties Uses the added registered paper in [Server Properties]. Form Note To display the Settings tab in Windows 2000/XP/NT 4.0/Server 2003, right-click the icon of the installed printer, and then click "Properties". bizhub 350/250 (Phase 2.5)
You can enlarge or reduce documents created when printing to match the output paper size. Click the Setup tab. From the "Original Size" and "Output Size" drop-down lists, select the desired settings. – You can also specify any enlargement or reduction ratio in the "Zoom" box. bizhub 350/250 (Phase 2.5)
"Custom Size Settings". The Custom Size Settings dialog box appears. Specify settings for the following: – Size: Specify the width and length of the custom size according to the selected measurement units. Click the [OK] button. 7-10 bizhub 350/250 (Phase 2.5)
Save in User Box and Print: Saves the document in a box and prints at the same time. – Proof and Print: After a part of the document has been printed, this machine stops printing temporarily. Select to avoid misprinting large print jobs. bizhub 350/250 (Phase 2.5) 7-11...
Page 196
Secure Print are limited and jobs are deleted when a password that does not meet the password rule is entered. For the password rules, refer to User manual [Copy Operations]. For details on the box functions of this machine, refer to User manual [Box Operations]. 7-12 bizhub 350/250 (Phase 2.5)
Page 197
In User Box Number, specify the number of the box that was created. For public box, enter "1". For details on the box functions of this machine, refer to User manual [Box Operations]. bizhub 350/250 (Phase 2.5) 7-13...
Page 198
For details, refer to "Print job management" on page 11-89. Proof and Print can be specified when "Collate" is specified. For details on the box functions of this machine, refer to User manual [Box Operations]. 7-14 bizhub 350/250 (Phase 2.5)
When the authentication settings have been applied on this machine, a user name and password must be entered. Click the Setup tab. Click the [User Authentication/Account Track] button. Select the "User Authentication" check box, and then enter the user name and password. bizhub 350/250 (Phase 2.5) 7-15...
Page 200
For details on user authentication and Enhance Security mode, refer to User manual [Copy Operations]. Detail For user authentication settings, consult the administrator of this machine. 7-16 bizhub 350/250 (Phase 2.5)
When performing user authentication on the machine and Synchronize is specified, you can print by inputting the user name and password in User Authentication. For the account track details, consult the administrator of this machine. bizhub 350/250 (Phase 2.5) 7-17...
[Combination Details] button, and then change the settings in the dialog box that appears. Note When printing a job that contains pages of different sizes and orientations, images may be missing or overlapping when the document is printed. bizhub 350/250 (Phase 2.5) 7-19...
The staple function is available only when optional finisher is installed. Click the Layout tab. From the "Staple" drop-down list, specify the number of staples and the stapling position. Note Depending on the selected Binding Position setting, different stapling positions are available. 7-20 bizhub 350/250 (Phase 2.5)
The hole punch function is available only when punch unit is installed on optional finisher. Click the Layout tab. From the "Hole-Punch" drop-down list, specify the number of punched holes. Note Depending on the selected Binding Position setting, different hole punching positions are available. bizhub 350/250 (Phase 2.5) 7-21...
"Back Cover Page" and "Front Cover Page" at the same time. The Save in User Box, Save in User Box and Print, and Proof and Print functions cannot be specified when the "Per Page Setting" setting is specified. 7-22 bizhub 350/250 (Phase 2.5)
Specify settings for the following: – Transparent: Prints the watermark with a transparent background. – 1st Page Only: Prints the watermark on the first page only. – Repeat: Prints several watermarks on a single page. bizhub 350/250 (Phase 2.5) 7-23...
– Position: Specifies the watermark position with the horizontal and vertical scroll bars. – Sharing: Specifies whether to share a watermark. Note Only the administrator of the computer can select a setting under "Sharing". 7-24 bizhub 350/250 (Phase 2.5)
When using TrueType fonts, select from the "Download Font Format" drop-down list the font type to be downloaded to the printer. Specify the font replacement list from the Device Settings tab. bizhub 350/250 (Phase 2.5) 7-25...
Note If the installed options are not set from the Option tab, the option function cannot be used with the printer driver. When installing options, be sure to make the proper settings. 7-26 bizhub 350/250 (Phase 2.5)
If "Printers and Faxes" does not appear in the Start menu, open the Control Panel from the Start menu, select "Printers and Other Hardware", and then select "Printers and Faxes". Right-click the "KONICA MINOLTA 350/250/200 PS" icon, and then click "Properties". Click the Option tab.
For PostScript drivers, you can save the setting values of the changed driver and recall them as necessary. Saving the driver settings Change the driver settings from the Setup tab and the Layout tab. Click the [Save] button. 7-28 bizhub 350/250 (Phase 2.5)
Page 213
Only the administrator of the computer can select a setting under "Sharing". Up to 30 characters can be entered in the "Name" text box. Up to 255 characters can be entered in the "Comment" text box. bizhub 350/250 (Phase 2.5) 7-29...
From the list, select the file that you want to change, and then change the setting. To delete the file, click the [Delete] button. Click the [Options] button, check the settings to recall, and then click the [OK] button. Click the [OK] button. 7-30 bizhub 350/250 (Phase 2.5)
Specifies the number of pages printed on one page. Orientation Specifies the orientation. Rotated Rotates the paper. Paper source Selects the input tray. Copies Specifies the number of copies to print. More Options Specifies the paper type and output device. bizhub 350/250 (Phase 2.5)
Inserts interleaves between overhead projector transparencies. Paper Tray Selects the input tray for the transparency interleaves. (Transparence Interleave) Wait Mode Stops printing temporarily after part of the document has been printed so that the proof print can be checked. bizhub 350/250 (Phase 2.5)
[Edit the Table] button. Always use built-in printer Prints all fonts with printer fonts. fonts instead of TrueType fonts Always use TrueType fonts The printer fonts are not substituted. Send Fonts As Specifies the font transmission method. bizhub 350/250 (Phase 2.5)
Copies: Specifies the number of copies to print. – More Options: Specifies the paper type and output device. Note The settings specified on this machine have precedence if multiple copies are specified in "Default Set" of this machine. bizhub 350/250 (Phase 2.5)
The Center Staple and Fold function is only available when the optional finisher and saddle kit are installed. The staple function is available only when optional finisher is installed. The hole punch function is available only when punch unit is installed on optional finisher. bizhub 350/250 (Phase 2.5)
Specifying settings For Windows 98 SE/Me, click the [Start] button, point to "Settings", and then click "Printers". Right-click the "KONICA MINOLTA 350/250/200 PS(P)" icon, and then click "Properties". Click the Device Options tab. Select a function, and then select the setting from the "Change setting for"...
Page 223
Setting up the PPD driver (Windows) Detail For the items and functions that can be specified, refer to "Settings" on page 8-3. bizhub 350/250 (Phase 2.5)
Page 224
Setting up the PPD driver (Windows) 8-10 bizhub 350/250 (Phase 2.5)
The functions of this machine can be specified on the Page Setup and Print dialog boxes displayed from an application. The settings can only be applied while using the application. When the application is exited, the settings return to their defaults. Page Setup dialog box bizhub 350/250 (Phase 2.5)
Page 228
Selects the specified unit. Note Depending on the application, "Page Setup" may be displayed as "Paper Setup". In addition, you may have to select "Paper Setup"—"Options" from the "File" menu. The dialog boxes differ depending on the application. bizhub 350/250 (Phase 2.5)
Specifies the conditions to download fonts. Layout Pages per sheet Specifies the number of pages to print on one page. Layout direction Specifies the page order for printing multiple pag- es on one page. Border Specifies the borders around pages. bizhub 350/250 (Phase 2.5)
Page 230
Stops printing temporarily after part of the docu- ment has been printed so that the proof print can be checked. Finishing Resolution Specifies the print resolution. Options 3 Note The dialog boxes differ depending on the application. bizhub 350/250 (Phase 2.5)
Select "Page Setup" or "Paper Setup" from the "File" menu. Select "Page Attributes". Specify settings for the following: – Paper: Specify the paper size. – Orientation: Specify the orientation. – Scale: Specify the enlargement and reduction ratio. bizhub 350/250 (Phase 2.5)
Page 232
Setting up the PPD driver (Mac OS 9.2) Note The folding function can be selected from the screen that is displayed when "Layout" is selected in the Print dialog box. bizhub 350/250 (Phase 2.5)
[OK] button. – Units: Selects the specified unit. Click the [OK] button. This registers the custom page settings which allows you to select the paper in the screen that appears when "Page Attributes" is selected. bizhub 350/250 (Phase 2.5)
Specify settings for the following: – Copies: Specifies the number of copies to print. – Collated: Prints multiple copies in sets. – Pages: Specifies the print range to print. – Paper Source: Selects the input tray. bizhub 350/250 (Phase 2.5) 9-11...
Page 236
Setting up the PPD driver (Mac OS 9.2) Note The settings specified on this machine have precedence if multiple copies are specified in "Default Set" of this machine. 9-12 bizhub 350/250 (Phase 2.5)
Select "Layout". Specify settings for the following: – Pages per sheet: Specifies the number of pages to print on one page. – Layout direction: Specifies the document page order. – Border: Specifies the borders around pages. bizhub 350/250 (Phase 2.5) 9-13...
Paper Tray (Transparency Interleave): Selects the input tray for the transparency interleaves. – Wait Mode: Stops printing temporarily after part of the document has been printed so that the proof print can be checked. – Resolution: Specifies the resolution. 9-14 bizhub 350/250 (Phase 2.5)
Page 239
The hole punch function is available only when punch unit is installed on optional finisher. You cannot specify settings in "Back Cover Page" only. Specify settings in "Back Cover Page" and "Front Cover Page" at the same time. bizhub 350/250 (Phase 2.5) 9-15...
The setting screen for adding options appears. Select the option that is installed on this machine from "Options Installed 1" and "Options Installed 2". Click the [OK] button. The Chooser window appears again. Close the Chooser window. 9-16 bizhub 350/250 (Phase 2.5)
Page 241
Setting up the PPD driver (Mac OS 9.2) Note The option settings are displayed automatically the first time the printer driver is selected. For details, refer to "Selecting a printer" on page 3-23. bizhub 350/250 (Phase 2.5) 9-17...
Page 242
Setting up the PPD driver (Mac OS 9.2) 9-18 bizhub 350/250 (Phase 2.5)
Function Page Attributes Paper Size Specifies the paper size. Orientation Specifies the orientation. Scale Specifies the enlargement and reduction ratio. Custom Page Size Paper Size Specifies any paper size. Printer Margins Specifies the paper margins. bizhub 350/250 (Phase 2.5) 10-3...
Page 246
Setup". In addition, you may have to select "Paper Setup"—"Options" from the "File" menu. The dialog boxes differ depending on the application. To specify the "Custom Paper Size" settings for Mac OS 10.4, select "Manage Custom Sizes" from the "Paper Size" drop-down list. 10-4 bizhub 350/250 (Phase 2.5)
Specifies the color conversion method. Quartz Filter Specifies the color for printing. Cover Page*1 Print Cover Page Specifies whether to attach a cover page. Cover Page Type Selects to print "Confidential" or other comments on the cover page. bizhub 350/250 (Phase 2.5) 10-5...
Page 248
User Box". User Authentication Checks if using user authentication and specifies user name and password. Account Track Checks if account track settings have been ap- plied and specifies the account name and pass- word. 10-6 bizhub 350/250 (Phase 2.5)
Page 249
The items indicated by "*1" are displayed in Mac OS X 10.3 and Mac OS X 10.4. The items indicated by "*2" are displayed only in Mac OS X 10.3. The items indicated by "*3" are displayed only in Mac OS X 10.4. bizhub 350/250 (Phase 2.5) 10-7...
Select "Page Setup" or "Paper Setup" from the "File" menu. Select "Page Attributes". Specify settings for the following: – Paper Size: Specifies the paper size. – Orientation: Specify the orientation. – Scale: Specify the enlargement and reduction ratio. 10-8 bizhub 350/250 (Phase 2.5)
For Mac OS X 10.4, proceed to step 7. Click the [OK] button. This registers the custom paper size which allows you to select the paper size in the screen that appears when "Page Attributes" is selected. bizhub 350/250 (Phase 2.5) 10-9...
Specify settings for the following: – Copies: Specifies the number of copies to print. – Collated: Do not select the "Collate" check box. Specify this setting in the sort function. – Pages: Specifies the print range to print. 10-10 bizhub 350/250 (Phase 2.5)
Page 253
Setting up the PPD driver (Mac OS X) Note The settings specified on this machine have precedence if multiple copies are specified in "Default Set" of this machine. bizhub 350/250 (Phase 2.5) 10-11...
– Pages per Sheet: Specifies the number of pages to print on one page. – Layout Direction: Specifies the page order for printing multiple pages on one page. – Border: Specifies the borders around pages. 10-12 bizhub 350/250 (Phase 2.5)
All pages from: Selects the input tray to print all pages. – First page from: Selects the input tray to print the first page. – Remaining from: Selects the input tray to print from the second page. bizhub 350/250 (Phase 2.5) 10-13...
Paper Tray (Transparency Interleave): Selects the input tray for the transparency interleaves. You cannot specify settings in "Back Cover Page" only. Specify settings in "Back Cover Page" and "Front Cover Page" at the same time. 10-14 bizhub 350/250 (Phase 2.5)
Output Tray: Selects the output tray. – Binding Position: Specifies the binding position. – Combination: Specifies booklet printing. – Staple: Performs stapling. – Hole-Punch: Performs hole punching. – Center Staple and Fold: Folds the printouts in half and staples. bizhub 350/250 (Phase 2.5) 10-15...
Page 258
The Center Staple and Fold function is only available when the optional finisher and saddle kit are installed. The staple function is available only when optional finisher is installed. The hole punch function is available only when punch unit is installed on optional finisher. 10-16 bizhub 350/250 (Phase 2.5)
– Account Track: Enters the access name and password when the account track settings have been applied on this machine and when the check box is selected. bizhub 350/250 (Phase 2.5) 10-17...
Page 260
When performing user authentication on the machine and Synchronize is specified, you can print by inputting the user name and password in User Authentication. For details on user authentication and Enhance Security mode, refer to User manual [Copy Operations]. 10-18 bizhub 350/250 (Phase 2.5)
Page 261
Secure Print are limited and jobs are deleted when a password that does not meet the password rule is entered. For the password rules, refer to User manual [Copy Operations]. For details on the box functions of this machine, refer to User manual [Box Operations]. bizhub 350/250 (Phase 2.5) 10-19...
From the [Printer] menu, select "Show Info". The Printer Info dialog box appears. Select "Installable Options". Select the options that are installed on this machine. Click the [Apply Changes] button or click [ ], to close the Printer Info dialog box. 10-20 bizhub 350/250 (Phase 2.5)
Change the driver settings in "Copies & Pages" and "Layout". From "Presets", click "Save As". Enter the preset name in "Save Preset As". Click the [OK] button. The settings are registered in the preset settings. bizhub 350/250 (Phase 2.5) 10-21...
Select "Presets" from the Print dialog box to change the settings. Change the driver settings in "Copies & Pages" and "Layout". From "Presets", click "Save". To delete, click "Delete". To change the name, click "Rename". The preset settings are changed. 10-22 bizhub 350/250 (Phase 2.5)
You can change the various printer settings on this machine’s control panel. Printer settings To display the Printer Setting screen Press the [Utility/Counter] key. Touch [Printer Setting]. Touch the desired setting button. The setting screen of the desired setting appears. bizhub 350/250 (Phase 2.5) 11-3...
Page 268
Various settings Specify settings for the following: MFP Set screen Default Set screen PDL Set screen Test Print screen 11-4 bizhub 350/250 (Phase 2.5)
The default screens are shown below and each setting can be specified. Basic Setting screen Font screen MFP Set Detail For details on displaying the MFP Set screen, refer to "Printer settings" on page 11-3. bizhub 350/250 (Phase 2.5) 11-5...
A3 size paper when 11×17-inch size paper is not available. – OFF: Does not substitutes letter size or 11×17-inch size paper with other paper sizes even when letter size or 11×17-inch size paper are not available. 11-6 bizhub 350/250 (Phase 2.5)
You can specify whether to print the error message when an error occurs during PS rasterization. (Default setting: OFF) After changing the setting, touch [Enter]. – ON: Prints the error message. – OFF: Does not print the error message. bizhub 350/250 (Phase 2.5) 11-7...
When selecting [8K], [16K], [envDL], or [env Monarch], you can only specify the paper size even when "envDL", "env Monarch", or "Postcard" has been selected. You cannot specify envelops and thick paper as a paper type. Touch [Others Sizes]. 11-8 bizhub 350/250 (Phase 2.5)
On the Basic Setting screen, touch [Print Method] to display the setting screen. After changing the setting, touch [Enter]. – 2-Sided Print: Performs duplex printing. You can select the binding orientation. – Simplex: Performs simplex printing. bizhub 350/250 (Phase 2.5) 11-9...
"Default Set - Basic Setting - # of Sets" of this machine. Note A value outside the allowable range cannot be specified. Type in a value within the allowable range. To cancel changes to the settings, touch [Cancel]. 11-10 bizhub 350/250 (Phase 2.5)
After using the keypad to type in a value, touch [Enter]. Note A value outside the allowable range cannot be specified. Type in a value within the allowable range. To cancel changes to the settings, touch [Cancel]. bizhub 350/250 (Phase 2.5) 11-13...
ISO 8859/9 Latin 5 Roman-8 ISO 8859/10 Latin 6 Windows 3.0 Latin 1 ISO 8859/15 Latin 9 Windows Baltic Legal Windows 3.1 Latin 1 Math-8 Windows 3.1 Latin 2 MC Text Windows 3.1 Latin 5 Microsoft Publishing PC-866 11-14 bizhub 350/250 (Phase 2.5)
Bit Map Font Size: Specifies the bitmap font size in pitchs. Note A value outside the allowable range cannot be specified. Type in a value within the allowable range. To cancel changes to the settings, touch [Cancel]. bizhub 350/250 (Phase 2.5) 11-15...
[Enter]. – Auto: Automatically switches between PCL and PostScript. – PCL: Only uses PCL. – PostScript: Only uses PostScript. Detail For details on displaying the PDL Setting screen, refer to "Printer settings" on page 11-3. 11-16 bizhub 350/250 (Phase 2.5)
Check Job Details: Outputs a list of this machine’s settings. – PCL Demo Page: Outputs a test page. – PCL Font List: Outputs the PCL font list. – PS Font List: Outputs the PS font list. bizhub 350/250 (Phase 2.5) 11-17...
Some printer function settings can only be changed by an administrator. To display the Administrator Management setting screen Press the [Utility/Counter] key. Touch [Admin. Management]. Type in the password using the keypad, and then touch [Enter]. Touch [Admin. 2]. 11-18 bizhub 350/250 (Phase 2.5)
Page 283
Various settings Touch [Printer Setting]. Specify settings for the following: Note To quit specifying the printer settings, touch [Enter] until the screen for the Copy, Fax, Scan, or Box mode appears. bizhub 350/250 (Phase 2.5) 11-19...
The time specified here for a timeout enables the parallel, USB, or network interface. A value outside the allowable range cannot be specified. Type in a value within the allowable range. To cancel changes to the settings, touch [Cancel]. 11-20 bizhub 350/250 (Phase 2.5)
When using this machine as a network printer, an IP address must be assigned to this machine. Detail For the procedure to assign an IP address to this machine, refer to "Setting the IP address for this machine" on page 4-9. bizhub 350/250 (Phase 2.5) 11-21...
Counter You can check the total number of printed pages. Press the [Utility/Counter] key on this machine’s control panel. Touch [Check Detail] on the lower-right corner of the screen. After checking each counter, touch [Exit]. 11-22 bizhub 350/250 (Phase 2.5)
The status of each function is displayed by a combination of hexadecimal numbers (0 to 9, A to F). When Bit Selection is "00110000", HEX Selection can be represented as "30". The status of the mode is specified in Bit Selection or HEX Se- lection. bizhub 350/250 (Phase 2.5) 11-23...
– To specify Bit selection, touch [Bit Selection], touch move the cursor to the bit to be changed, type in the value using keypad, and then touch [Set] on the lower right of the screen. bizhub 350/250 (Phase 2.5) 11-25...
Page 290
[A] to [F], and then touch [Set] on the lower right of the screen. To change the setting for a different mode, repeat steps 3 and 4. Touch [Enter] on the upper right of the screen until the first screen appears. 11-26 bizhub 350/250 (Phase 2.5)
Do not apply a password p. 11-93 whether to apply a rule password rule. Apply a password rule 3, 2, 1, 0 --------------------- 0000 * Do not change these bits ---------- when specifying settings for this function. bizhub 350/250 (Phase 2.5) 11-27...
Page 292
Check that the following passwords comply with the rules. User Authentication user password Account Track password Administrator and service password Secured Print password User Box password For the password rules, refer to User manual [Copy Operations]. 11-28 bizhub 350/250 (Phase 2.5)
Deletes the character to the left of the cursor 6, 5, 4, 3, 2, ----------------------- 0000000 * Do not change these ---------- 1, 0 bits when specifying set- tings for this function. Note Default setting: 0 bizhub 350/250 (Phase 2.5) 11-29...
Netscape Navigator 4.73 or 7.0 Windows 2000 Microsoft Internet Explorer 5 or later Netscape Navigator 7.0 Windows XP Microsoft Internet Explorer 6 or later Netscape Navigator 7.0 If using Microsoft Internet Explorer 5.5, use Service Pack 1 or lat- 11-30 bizhub 350/250 (Phase 2.5)
For the procedure to assign an IP address to this machine, refer to "Setting the IP address for this machine" on page 4-9. Note When accessing with PageScope Web Connection, do not use a proxy server. bizhub 350/250 (Phase 2.5) 11-31...
For details on user authentication and Enhance Security mode, refer to User manual [Copy Operations]. For the user name and password, ask your network administrator. 11-32 bizhub 350/250 (Phase 2.5)
By entering the administrator password and clicking the [Log-in] button, you can display the Administrator mode page. For details, refer to "Logging on to Administrator mode" on page 11-35. The configuration of the PageScope Web Connection page is shown below. bizhub 350/250 (Phase 2.5) 11-33...
Page 298
Various settings Item Description KONICA MINOLTA Logo Click the logo to go to the Konica Minolta Web site at the following URL. http://konicaminolta.com PageScope Web Connection Click the PageScope Web Connection logo to display Logo the version information. Administrator mode logon Click to log on to the Administrator mode.
Page 299
You can switch between User mode and Administrator mode. However, in order to specify system or network settings, you must be logged on to Administrator mode. Enter the administrator password for this machine in the "Admin Password" box, and then click the [Log-in] button. bizhub 350/250 (Phase 2.5) 11-35...
Page 300
DIP switch, the corresponding user may be locked out and denied access if the authentication information is not entered correctly. For details on Enhance Security mode, refer to User manual [Copy Operations]. 11-36 bizhub 350/250 (Phase 2.5)
For Netscape Navigator On the "Edit" menu, click "Preferences". In the "Category" box, click "Advanced", then "Cache". Under "Compare the page in the cache to the page on the network", select "Every time I view the page". bizhub 350/250 (Phase 2.5) 11-37...
The Scan tab is the Fax/Scan tab when the optional fax kit is installed. This manual describes the printer related functions. For the box and scanner functions of this machine, refer to User manual [Box Operations] and User manual [Network Scanner Operations]. 11-38 bizhub 350/250 (Phase 2.5)
Web browser. The Summary page shows the current system configuration and status of this machine. Item Description Device Information This area uses graphics and text to show the configuration of op- tions installed on this machine. bizhub 350/250 (Phase 2.5) 11-39...
Click the System tab, click "Detail", and then click "Paper Tray" in the sub- menu that appeared. You can check the status of the paper trays of this machine. Item Description Tray Displays information for each item. Paper Size Paper Type Paper 11-40 bizhub 350/250 (Phase 2.5)
Click the System tab, click "Detail", and then click "Output Tray" in the sub- menu that appeared. You can check the status of the output trays of this machine. Item Description Output Tray Displays the tray name and status of each installed tray. bizhub 350/250 (Phase 2.5) 11-41...
Displays the total size of the installed hard disk. Used Displays the amount of space used by the system. Remain Displays the amount of free hard disk space. Note "HDD" can only be displayed when an optional hard disk is installed. 11-42 bizhub 350/250 (Phase 2.5)
Click the System tab, click "Detail", and then click "Interface Information" in the sub-menu that appeared. You can check the interface information of this machine. Item Description Interface Information Displays the network information. Local I/F Displays the local interface information. bizhub 350/250 (Phase 2.5) 11-43...
The status may not be displayed correctly if the consumables are not installed. "Staple Cartridge", "Saddle Staple Cartridge 1", "Saddle Staple Cartridge 2", and "Dust Box" are displayed according to whether the optional finishers are installed. 11-44 bizhub 350/250 (Phase 2.5)
Displays the total of the output counter (copies, prints, scans, and faxes). Copy/PC Print Displays each counter. Scanner/Fax Paper Total Counter Displays the output counter for each paper size. Note "Fax" can only be displayed when the optional fax kit is installed. bizhub 350/250 (Phase 2.5) 11-45...
Click the System tab, and then click "Online Assistance" in the menu. You can check support information concerning the product. Item Description Contact Name Displays information for each item. Contact Information Product Help URL Corporate URL Supplies and Accesso- ries Online Manual URL 11-46 bizhub 350/250 (Phase 2.5)
Sample Print page Item Description Print Displays the print job list and details. Displays the fax and scan transmission job list and details. Displays the fax reception job list and details. bizhub 350/250 (Phase 2.5) 11-47...
Page 312
Various settings Note The job number that was assigned when the job was queued in this machine appears as the job number. 11-48 bizhub 350/250 (Phase 2.5)
If a print job is sent whose settings are not specified, the settings specified here are used for printing. Sample General Settings page Item Description General Settings Displays information for each item. PCL Settings PS Settings bizhub 350/250 (Phase 2.5) 11-49...
Prints the various configuration information pages of this machine. PCL Demo Page Prints a demo page. PCL Font List Prints the font list that is used by PCL. PS Font List Prints the font list that is used by PostScript. 11-50 bizhub 350/250 (Phase 2.5)
Click a tab, and then select an item from the menu. Specify settings for the displayed items. Either enter a setting directly or select one from the drop-down list. Click the [Apply] button to apply the settings. bizhub 350/250 (Phase 2.5) 11-51...
You can specify the related settings for process a mixed document. Item Description Mixed Original Detection Specify whether to set the mixed original detection mode to the de- fault value. 11-52 bizhub 350/250 (Phase 2.5)
When the 2in1, 4in1, or booklet functions are used, specify whether Booklets to automatically enable a suitable zoom ratio. On: The "4in1" zoom ratio is 0.500, and the "2in1" and "Booklet" zoom ratio is 0.707. Off: Does not automatically specify the zoom ratio. bizhub 350/250 (Phase 2.5) 11-53...
Specify the time until the auto reset function operates and returns to the default setting. Auto Reset when Ac- Specify whether to return to the default setting when the password count is changed is entered or the key counter is removed. 11-54 bizhub 350/250 (Phase 2.5)
Page 319
Various settings Note For details on Enhance Security mode, refer to User manual [Copy Operations]. bizhub 350/250 (Phase 2.5) 11-55...
System tab - User’s Choice - User’s Choice 4 Click the System tab, click "User’s Choice", and then click "User’s Choice 4" in the sub-menu that appeared. You can specify the layout and quality print settings. 11-56 bizhub 350/250 (Phase 2.5)
Page 321
Mode (Staple) Output Specify the hole punching default setting. Mode (Punch) Note The staple function is displayed only when optional finisher is installed. The hole punching function is displayed only when punch unit is installed. bizhub 350/250 (Phase 2.5) 11-57...
A5 size or smaller, or when an original document has not been loaded. On: Copies using the priority paper. Off: Displays the input tray select screen. 11-58 bizhub 350/250 (Phase 2.5)
Page 323
Various settings Note The display of the output tray function may differ according to the status of the installed options. bizhub 350/250 (Phase 2.5) 11-59...
Mode 1: Suitable for copying light original documents such original documents written in pencil. Mode 2: Suitable for standard original documents. Note The Priority Mail Screen tab is the Priority Fax Screen tab when the optional fax kit is installed. 11-60 bizhub 350/250 (Phase 2.5)
Enter the time and date for this machine. Item Description Year Enter the year. Month Enter the month. Enter the day. Hour Enter the time. Enter the minutes. Time Zone Specify the time difference from GMT. D.S.T. Specify the daylight savings time. bizhub 350/250 (Phase 2.5) 11-61...
Specify whether to prohibit the one-touch registration specified by the user settings. When the Enhance Security mode is enabled on this machine, this setting cannot be specified. Activity Report E-mail Specify the destination e-mail address for sending the activity re- Address port. 11-62 bizhub 350/250 (Phase 2.5)
Page 327
Various settings Note For details on Enhance Security mode, refer to User manual [Copy Operations]. bizhub 350/250 (Phase 2.5) 11-63...
Registers the account data (account name, password, print maxi- mum value) to an account number. Account Counter 1 Displays the total counter per account. Account Counter 2 Account Counter 3 Note For details on the account track, refer to User manual [Copy Operations]. 11-64 bizhub 350/250 (Phase 2.5)
User Authentication Registers the user information (user name and password) to a user number. User List Displays the registered users. User Counter 1 Displays the total counter per user. User Counter 2 User Counter 3 bizhub 350/250 (Phase 2.5) 11-65...
Page 330
When performing user authentication on the machine and Synchronize is specified, the total is added up in the account counter and User Counter 1 to 3 are not displayed. Check Account Counter 1 to 3. 11-66 bizhub 350/250 (Phase 2.5)
System tab in the User mode, then click "Online Assistance". Item Description Contact Name Specify information for each item. Contact Information Product Help URL Corporate URL Supplies and Accesso- ries Online Manual URL bizhub 350/250 (Phase 2.5) 11-67...
Item Description Timeout Enter the reception timeout for the interface port (input range: 10- 1000). Mode Select the parallel port transmission method. Note "Mode" can only be displayed when optional local interface kit is installed. 11-68 bizhub 350/250 (Phase 2.5)
Various settings Print tab - Default Settings - General Settings You can specify the default setting values of the printer. bizhub 350/250 (Phase 2.5) 11-69...
Page 334
Priority Tray :Feeds paper from a different input tray. Fixed Tray :Displays a warning message without printing. If paper is specified that cannot be loaded in the specified input tray, the job is deleted. 11-70 bizhub 350/250 (Phase 2.5)
Enter the number of lines per page (input range: 5-128). Font Size Enter the font size for the scalable font and the bitmap font (input range: Scalable Font 4.00-999.75, Bit Map Font 0.44-99.00). CR/LF Mapping Select the CR/LF operation. bizhub 350/250 (Phase 2.5) 11-71...
Various settings Print tab - Default Settings - PS Settings You can specify the default setting values of the PS mode. Item Description PostScript Error Report Specify whether to enable the printing of errors. 11-72 bizhub 350/250 (Phase 2.5)
Specify the device name (up to 127 alphanumeric characters and symbols). Printer Location Specify the device location (up to 127 alphanumeric characters and symbols). Printer Information Specify the printer description (up to 127 alphanumeric characters and symbols). bizhub 350/250 (Phase 2.5) 11-73...
The Scan tab is the Fax/Scan tab when the optional fax kit is installed. Network tab On the Network tab, information and settings concerning the network connection are displayed. Note "IP Relay Settings" on the Network tab is displayed when optional fax kit or scanner unit is installed. 11-74 bizhub 350/250 (Phase 2.5)
Various settings Network tab - Common Setting - TCP/IP You can specify the TCP/IP settings. bizhub 350/250 (Phase 2.5) 11-75...
Page 340
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. 11-76 bizhub 350/250 (Phase 2.5)
***.***.***.***", input range for ***: 0-255, and "0.0.0.0" cannot be entered). Refuse Address Specify whether to enable rejection of an IP address setting. Area 1—3 Enter the IP address being rejected (format: "***.***.***.***- ***.***.***.***", input range for ***: 0-255, and "0.0.0.0" cannot be entered). bizhub 350/250 (Phase 2.5) 11-77...
Page 342
Leave the start address empty and enter the IP address in the end address. For example, "empty - 192.168.11.22"). Enter the same IP address in the start address and the end address. For example, "192.168.11.22 – 192.168.11.22"). 11-78 bizhub 350/250 (Phase 2.5)
Various settings Network tab - Common Setting - NetWare You can specify the NetWare settings. 11-80 bizhub 350/250 (Phase 2.5)
Page 345
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. bizhub 350/250 (Phase 2.5) 11-81...
Various settings Network tab - Common Setting - NetWare Status "NetWare Server" and "Queue Name" appear as the NetWare connection status. 11-82 bizhub 350/250 (Phase 2.5)
Enter the print service name (up to 13 alphanumeric characters, ex- cluding spaces / \ ,). WorkGroup Name Enter the work group name (up to 15 alphanumeric characters, ex- cluding spaces \ * + = | : ; “ ? < > ,). bizhub 350/250 (Phase 2.5) 11-83...
Page 348
10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. Note Only the PCL printer driver can be used with Windows printing. 11-84 bizhub 350/250 (Phase 2.5)
Printer Name Enter the printer name (up to 31 alphanumeric characters, excluding = ~). Zone Name Specify the zone name (up to 31 alphanumeric characters, excluding = ~). Current Zone Displays the current zone name. bizhub 350/250 (Phase 2.5) 11-85...
Page 350
When turning the machine off, then on again with the main power switch, wait about 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. 11-86 bizhub 350/250 (Phase 2.5)
(up to 64 alphanumeric characters). NTLM Enter the NT server domain name (up to 15 alphanumeric charac- ters). Enter the NDS tree name (up to 63 alphanumeric characters). Enter the NDS context name (up to 127 alphanumeric characters). bizhub 350/250 (Phase 2.5) 11-87...
Page 352
Various settings Note For details on the authentication of external servers, refer to User manual [Copy Operations]. 11-88 bizhub 350/250 (Phase 2.5)
Note The three printer drivers that can be set on this machine are as follows: Konica Minolta PCL printer driver for Windows Konica Minolta PostScript printer driver for Windows 2000/XP/Server 2003 PPD printer driver for Mac OS X Specifying settings (for Windows) Click the [Properties] button or the [Preferences] button on the printer driver setup dialog box.
Page 354
@ _ - . , ( ) [ ] { } < >) can be entered in the "File Name" text box. Be sure to enter a user-friendly file name. In User Box Number, specify the number of the box that was created. For public boxes, enter "1". 11-90 bizhub 350/250 (Phase 2.5)
% & ' ~ = \ | ; : * ` / ? @ _ - . , ( ) [ ] { } < >) can be entered in the "Secure Print ID" and "Password" text boxes. bizhub 350/250 (Phase 2.5) 11-91...
Page 356
@ _ - . , ( ) [ ] { } < >) can be entered in the "File Name" text box. Be sure to enter a user-friendly file name. In User Box Number, specify the number of the box that was created. For public boxes, enter "1". 11-92 bizhub 350/250 (Phase 2.5)
Touch [Action]. The Action screen appears. – To change the settings of the printing conditions, proceed to step 5. – If you are not changing the settings of the printing conditions, proceed to step 7. bizhub 350/250 (Phase 2.5) 11-93...
Page 358
The stored job is changed to an active job, then printed. Note To delete and not print a job, touch [Delete]. Jobs in [Proof Print] or [Secure Print] are deleted after being printed or when this machine is turned off. 11-94 bizhub 350/250 (Phase 2.5)
Press the [Box] key on this machine’s control panel. Touch [Secure Print]. Enter the ID and password in Secure Print, and then touch [Enter]. From the job list, select the job you want to print. Touch [Action]. The Action screen appears. bizhub 350/250 (Phase 2.5) 11-95...
Page 360
Secure Print is specified by the software DIP switch, it is not necessary to enter the password in step 3. When Secure Print is selected in steps 4 and 5, enter the password in the password screen that appears. 11-96 bizhub 350/250 (Phase 2.5)
User manual [Copy Operations]. The three printer drivers that can be set on this machine are as follows: Konica Minolta PCL printer driver for Windows Konica Minolta PostScript printer driver for Windows 2000/XP/Server 2003 PPD printer driver for Mac OS X...
After specifying the settings, click the [OK] button to begin printing. If the entered password is a password registered on this machine, the job is printed. For Account Track, the number of pages to print is counted as a job for the specified account. 11-98 bizhub 350/250 (Phase 2.5)
Select a check box, and then enter each item. – If the "User Authentication" check box is selected, enter the user name and password. – If the "Account Track" check box is selected, enter the department name and password. bizhub 350/250 (Phase 2.5) 11-99...
The setup program starts up. Follow the on-screen instructions to complete the installation. Note When installed as a standard installation, the tool is saved in "KONICA MINOLTA" - "Print Status Notifier" - "Print Status Notifier" in "Programs". To uninstall the tool, execute "PrintNotify\setup.exe" again. 11-100 bizhub 350/250 (Phase 2.5)
Various settings Starting the tool From the Start menu, click "Programs" - "Konica Minolta" - "Print Status Notifier" - "Print Status Notifier". – Print Status Notifier is started and an icon appears in the task tray. Right-click the task tray icon to display each screen.
Proof and Print, Secure Print, Save in User Box, and Save in User Box and Print. - Error: Displays errors such as no paper or consumable replacement. - Job: Displays that a job has been deleted due to insufficient memory or authentication errors. 11-102 bizhub 350/250 (Phase 2.5)
Saves or deletes the shortcut file at startup. The shortcut file is startup saved when the check box is selected and deleted when the check box is not selected. When saved at startup, Print Status Notifier au- tomatically starts up when the computer is started. bizhub 350/250 (Phase 2.5) 11-103...
Page 368
Various settings 11-104 bizhub 350/250 (Phase 2.5)
There is an error in the applica- Refer to the user’s manual of the tion software settings. application software to check the settings. The file printing settings are in- Change the settings and try to correct. print again. bizhub 350/250 (Phase 2.5) 12-3...
Page 372
For details, consult with the network administrator. A password rule may be ena- Enter the password that meets bled on this machine. the password rule. Available memory space is not Add memory. sufficient. 12-4 bizhub 350/250 (Phase 2.5)
Page 373
"Proof Print" and "Secure Print" in Box mode on this machine’s control panel. If jobs are remaining, print or delete the stored jobs. If the problem persists after all of these procedures have been performed, read the User manual [Copy Operations]. bizhub 350/250 (Phase 2.5) 12-5...
Stapling is not possible if the Check the document. document contains pages of dif- ferent sizes. 12-6 bizhub 350/250 (Phase 2.5)
Page 375
Clear the "Collate" (for Win- not performed. "Collated" (for Mac OS X) check dows) or "Collated" (for Mac OS box is selected on the print set- X) check box. Proof and Print is no be up dialog box. performed. bizhub 350/250 (Phase 2.5) 12-7...
35 pages/minute (bizhub 350, Letter) Fast print time 5.3 seconds or less (bizhub 200/250, Letter, when using 1st tray) 4.8 seconds or less (bizhub 350, Letter, when using 1st tray) Printer language PCL5e emulation PCL6 (XL 2.1) emulation PostScript 3 emulation Operating environment condi- Temperature 10 to 30 °C...
Page 380
Microsoft Internet Explorer 5 or later recommended Netscape Navigator 7.0 Windows XP Microsoft Internet Explorer 6 or later recommended Netscape Navigator 7.0 * If using Microsoft Internet Explorer 5.5, use Service Pack 1 or later. 13-4 bizhub 350/250 (Phase 2.5)
Type of communication format used in a NetWare environment. Communication is not possible if the same frame type is not used. Abbreviation for File Transfer Protocol. A protocol for transferring files over the Internet or an intranet on the TCP/IP network. bizhub 350/250 (Phase 2.5) 13-9...
Page 387
A typical page-descriptive language developed by Adobe and is commonly used for high quality printing Abbreviation for PostScript Printer Description. A file used to de- scribe the resolution, usable paper size, and the PostScript printer model special information. bizhub 350/250 (Phase 2.5) 13-11...
Page 388
It is used to identify the bits in a network address that are higher than the IP address. TCP/IP Abbreviation for Transmission Control Protocol/Internet Protocol. The de facto standard protocol used by the Internet that uses IP ad- dresses to identify each network device. 13-12 bizhub 350/250 (Phase 2.5)
Page 389
Abbreviation for Universal Serial Bus. A general interface standard for connecting a mouse, printer, and other devices to a computer. Web Browser Software such as Internet Explorer and Netscape Navigator for view- ing Web pages bizhub 350/250 (Phase 2.5) 13-13...