11
Specifying settings for the range of administrator passwords and the in-
formation indicated in the report for direct faxing/IP relay transmissions
(mode 368)
Specify the valid range of administrator passwords. In addition, specify
whether or not the results of direct faxing or IP relay transmissions are indi-
cated in the reception report.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6
5, 4, 3, 2
1
0
11-86
7 6 5 4 3 2 1 0
1 1 0 0 0 0 1 0 (HEX: C2)
Description
Setting
-----------------------
1
Specifies the valid
0
range of administra-
tor passwords.
1
-----------------------
0000
Specifies whether or
0
not the results of
1
scan transmissions
are indicated in the
transmission report.
Specifies whether or
0
not the results of di-
1
rect faxing or IP re-
lay transmissions
are indicated in the
reception report.
Description
*Do not change this bit.
The administrator pass-
word is required only with
PageScope Web Con-
nection.
The administrator pass-
word is required with this
machine and with Page-
Scope Web Connection.
*Do not change these
bits.
Not indicated
Indicated
Not indicated
Indicated
bizhub 350/250
Page Refer-
ence
----------
----------
----------
----------
p. 13-6