Error Message Displayed - Konica Minolta bizhub FK-503 User Manual

5
5.3

Error message displayed

When a problem occurs with the FK-502, the following error messages are
displayed in the screen. Take corrective actions by referring to the explana-
tion. If the document still cannot be sent properly even after attempting to
correct the problem, please contact your service representative.
!
Detail
Refer to the "User's guide – Copy operations" provided with the FK-503
for problems such as jamming of originals, paper jams, poor image qual-
ity or running out of toner.
Error message
Original size cannot be detect-
ed.
This mode cannot be set with
XXX.
The job has been deleted. Not
enough remaining memory.
Malfunction detected. Please
call your Technical Representa-
tive.
If any message other than those listed above appears, perform the operation
described in the message.
5-6
Cause
The paper size of the document
cannot be detected.
Functions that cannot be used
together are selected.
The memory is full.
Some malfunction occurred in
the machine.
Remedy
Select the paper size of
the document.
Make copies using only
one of the functions.
If documents stored in the
memory are waiting to be
printed, print them.
Inform your technical rep-
resentative of the code
displayed on the touch
panel.
bizhub 350/250