Konica Minolta bizhub FK-503 User Manual page 181

10
If desired, press [F-CODE Pass-
word], and then type in password.
– Register a password for each
confidential box.
– A maximum of 20 characters (0
through 9, # and *) can be en-
tered. The entered password ap-
pears as asterisks (*).
Although a password was speci-
?
fied, why can't viewing be limited?
% The password is entered when limiting viewing of the confidential
box. To specify the viewing limitations, press [Remote Input
Check].
11
Press [Remote Input Check].
12
Press either [ON] or [OFF] to specify
a setting for "Remote Input Check",
and then press [Enter].
– If "ON" was selected, type in an
F-code password.
What does the "Remote Input
?
Check" function do?
% This function specifies whether or
not registering a document in this
machine's confidential box from another fax machine is regulated
with a password.
13
After verifying the entered informa-
tion, touch [Enter].
– To change a setting, press the
button for the setting to be
changed, and then specify the
new setting.
14
Press [Enter] in each screen until the
standby screen (initial screen) ap-
pears.
bizhub 350/250
10
10-29