Table of Contents
Advertisement
10
–
To transmit overseas, press [Overseas].
When faxing overseas, depending on the destination, a transmis-
sion error may occur if the transmission conditions are poor. In this
case, press [Overseas] to decrease the transmission speed and al-
low the fax to be received more easily.
–
To specify F-codes, press [F-CODE]. For details, refer to "Register-
ing F-CODEs" on page 10-7.
–
To specify the transmission speed, press [Speed]. For details, refer
to "Setting the Communication Speed" on page 10-9.
9
Check the information to be regis-
tered, and then press [Enter].
–
To change a setting, press the
button for the setting to be
changed, and then specify the
new setting.
What does the three-digit
?
number beginning with "#" refer
to?
% The one-touch dial button number appears as a three-digit number
beginning with "#". A one-touch dial button number is specified for
each one-touch dial button. Instead of touching the one-touch dial
button, the recipient can be specified by touching "#", then entering
the one-touch dial button number (between 000 and 539).
10
Press [Enter] in each screen until the standby screen (initial screen) ap-
pears.
Note
If [One-Touch], then [Sub Address Registration] is pressed, a recipient
can be registered for automatic selection. For details, refer to "Register-
ing/deleting a secondary destination" on page 10-12.
10-6
bizhub 350/250
Hide quick links:
Advertisement
Table of Contents
