Specifying The Setting For Selecting Paper When Printing Received Documents (Mode 008) - Konica Minolta bizhub FK-503 User Manual

11
Specifying the setting for selecting paper when printing received docu-
ments (mode 008)
Specify the settings for selecting paper when printing received documents.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6, 5, 4, 3
2, 1, 0
11-74
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specifies how to de- 0
termine whether or
not there is paper.
(Available only when
1
printing received
documents.)
Specifies the paper 0000
size according to the
received image.
(Available only when
printing received
documents.)
0100
1000
Others
----------------------- 000
Description
Paper priority method
(determined by whether
or not there is paper)
Tray paper method (de-
termined by the tray pa-
per size setting or the
previous paper informa-
tion, regardless of wheth-
er or not there is paper)
Automatically selects the
appropriate paper ac-
cording to the length and
width of the transmitted
document
Does not select paper
with a width larger than
the width of the transmit-
ted document
Selects paper with a
width that is the same as
the width of the transmit-
ted document
*Do not specify any set-
tings other than those
mentioned above.
*Do not change these
bits.
bizhub 350/250
Page Refer-
ence
p. 4-6
p. 4-6
----------