Konica Minolta bizhub FK-503 User Manual page 70

3
Transmitting by a Fax Program
When often-used functions are registered in the fax program, it is possible to
set multiple functions at once by touching the fax program key.
If functions (resolution, 2in1 transmission, etc.) to be used during
transmission are registered with the fax program, specifying the settings is
possible only if that fax program key is selected. If multiple recipients are
registered with a fax program, transmission is possible only if that key is
selected. If a time is specified, the transmission can be performed every day
at the set time.
1
Press [Fax/Scan] on the control panel to open the fax screen.
– The recipient and transmission settings must have been registered
with a program button in advance. For details, refer to "FAX Pro-
gram Registration" on page 10-15.
– If desired, press [Quality & Reduction] or [FAX Menu], and then
specify the desired settings. For details on the settings available on
the Quality & Reduction screen, refer to "Setting transmission con-
ditions" on page 3-9. For details on the settings available on the
FAX Menu screen, refer to "Transmission applications" on
page 7-3.
2
Press [One-Touch].
3
Press the desired program button.
– Press the index tabs and [
and [
gram button.
–
If you touch a key mistakenly,
pressing the same key again will
release it.
The buttons registered with fax pro-
grams have a frame around them.
3-22
] to find the desired pro-
]
bizhub 350/250