Checking A Report For The Transmission Result ("Tx Report" Function); To Print The Transmission Report - Konica Minolta bizhub FK-503 User Manual

7.4 Checking a report for the transmission result ("TX Re-
port" function)
A report containing the transmission results can be printed. The machine can
be set to either print or not print the transmission report or to print it accord-
ing to the machine setting or only when a transmission fails.

To print the transmission report

1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [TX Report] on the Set 1
screen.
4
Select how to output the report, and
then press [Enter].
– Default: The transmission report
is printed according to the previ-
ously specified method. For de-
tails, refer to "Settings for Report
Output" on page 11-45.
– ON: The transmission report is
printed with each transmission.
– If TX Fails: The transmission report is printed only if the fax could
not be sent.
– OFF: The transmission report is not printed, regardless of the trans-
mission result.
5
Designate the destination. Set the original document.
6
Press [Start].
bizhub 350/250
7
7-11