Output Tray Settings; Default Screen - Konica Minolta bizhub FK-503 User Manual

11

Output tray settings

Tab Parameter
5/6
Note
The "Output Tray Settings" parameter appears only if optional finisher or
job separator is installed.
In order to use port 2, optional fax multi line must be installed.
"1" (output tray 1) appears when a finisher is installed, and "2" (output
tray 2) appears when the job separator is installed.

Default screen

Tab Parameter
6/6 Default
Screen
11-12
Description
FAX (Port 1) Select the exit tray for data
received at the fax port.
Port 2 Select the exit tray for data
received at port 2 when
the multi port is installed.
Faxes/Prints Select the exit tray for data
received from the network.
Printer Specify the exit tray for
computer printouts.
Copies Specify the exit tray for
copies.
Description
Default LCD Select one of the following
Screen as the mode screen given
priority.
Copy, FAX, Scanner, FAX/
Copy Auto
Default FAX Select one of the following
Screen as the Fax mode screen
given priority.
One-Touch, Search, Direct
Input, Index
Default Setting
1 (output tray 1)
1 (output tray 1)
1 (output tray 1)
1 (output tray 1)
2 (output tray 2)
1 (output tray 1)
Default Setting
Copy
One-Touch
bizhub 350/250