12.13 Report output settings (Administrator mode)
The output conditions of the send result reports and communication control
reports can be specified.
The following settings can be specified.
Item
TX Report
(Single destina-
tion)
TX Report
(Multiple desti-
nation)
Activity Report
bizhub 350/250
Description
Select the output of the result report sent to a single destination.
Output On: Outputs regardless of the results.
If TX Fail: Outputs only when undeliverable.
Output Off: Does not output regardless of the results.
Select the output of the result report sent to multiple destinations.
Output On: Outputs regardless of the results.
If TX Fail: Outputs only when undeliverable.
Output Off: Does not output regardless of the results.
Select the communication control report that is output every 50 transmis-
sions.
12
12-47