Confirming Settings And Communication Results - Konica Minolta bizhub FK-503 User Manual

Confirming settings and communication results

The settings and communication results of the fax screen and fax application
screen can be confirmed by using Check Job Details on the control panel.
1
Press [Fax/Scan] on the control panel.
2
Press [Mode Check] on the control panel.
3
Press a key of setting you want to
confirm.
4
Press [Enter] to confirm the settings.
Dest. tab
Up to four selected destinations can be
viewed in each screen. If more than four
destinations have been selected, press [ ]
and [ ] to display a different screen. Des-
tinations can be deleted or added.
:
Indicates that the recipient was selected using the one-touch dial buttons.
:
Indicates that the fax number was directly typed in.
[Delete]: Press this button to delete the selected recipient.
[Detail]: Press this button to check the transmission mode of the selected re-
cipient.
[Next Destination]: Press this button to add a recipient.
!
Detail
For details on adding a recipient, refer to "Selecting one destination" on
page 3-19.
bizhub 350/250
3
3-17