3
3.3
Sending multiple originals from
Originals that cannot be sent with the ADF can be sent by using the platen
glass.
Sending multiple originals from the platen glass
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Set the desired functions as necessary.
3
Select a destination.
4
Place the original on the platen glass.
5
Press [Start].
The first page of the document is scanned.
6
Place the next original on the platen
glass and press [Scan Next Page],
and then press [Start].
The second page of the document is
scanned. Repeat this procedure until
all originals to be sent have been
scanned.
–
The amount of memory available
can be checked beside "Memory
Free" in the lower-right corner of the screen.
–
To delete the scan data, press the [Stop] key, and then delete the
job. For details, refer to "Stopping the transmission" on page 3-33.
7
Press [Finish].
8
Press [Start].
–
To stop the transmission, press
the [Stop] key. For details, refer to
"Stopping the transmission" on
page 3-33.
Transmission begins.
Note
If the fax could not be sent, a transmission report is printed. For details,
refer to "When unable to send" on page 3-32.
3-8
the platen glass
bizhub 350/250