Specifying machine functions (software switch settings)
2.5.17
Specifying transmission source information for IP address fax transmissions and IP
relay operations (mode 351)
Specify the transmission source information for IP relay operations or for forwarding received IP address fax
documents.
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits
Description
−
7-4
3
Specify whether or not the transmission source information
is added to originals sent with a IP relay operation.
−
2
1
Specify whether the IP address or the device name of the
transmission source is added to the Subject line when a re-
ceived IP address fax document is forwarded.
−
0
2.5.18
Specifying whether transmission source information is added when performing a IP
relay operation, or when forwarding received documents (mode 352)
Specify how transmission source information is added when performing a IP relay operation, or when
forwarding received documents.
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits
Description
−
7
6
Specify where transmission source information is added with
IP relay operations.
5
Specify whether or not transmission source information is
added to received documents that are forwarded. (black and
white only)
4
Specify where transmission source information is added
when a received document is forwarded.
−
3-0
C200
7654 3210
0001 1100 (HEX: 1C)
7654 3210
1101 0000 (HEX: D0)
Settings
Details
0001
*Do not change the settings
for these bits.
0
Not added
1
Added
1
*Do not change the setting
for this bit.
0
Priority given to device
name
1
Priority given to IP address
0
*Do not change the setting
for this bit.
Settings
Details
1
*Do not change the setting
for this bit.
0
Outside of the document
1
Inside the document
0
Not added
1
Added
0
Outside of the document
1
Inside the document
0000
*Do not change the settings
for these bits.
2
2-33