Table of Contents
Advertisement
2-12
6. Auxiliary Functions
Access Number
If an access number has been programmed, it
allows only particular persons to use the copier or
a supervisor to keep track of the number of copies
made by a particular department.
NOTES
• If an access number has been programmed, a
copy cycle can be initiated only after the access
number has been input to the copier.
<"Access #" Prompt Screen>
• Before you can use this function, you must first
turn "ON" the "Copy Track" function of the
Administrator Mode available from User's
Choice.
p. 5-3
Entering the Access Number
Using the 10-Key Pad, enter the 4-digit
1
access number and press the OK Key.
1
2
4
5
7
8
0
NOTE
To correct the 4-digit access number entered,
first press the Clear Key, then enter the new
number.
1154P449CA
3
6
9
C
1154O401
The Touch Panel changes from the "Access
2
#" prompt to the initial screen. A copy cycle
can now be started. Make your copies as
necessary.
When the copy cycle is completed, press the
3
Access Mode Key to go to the "Access #
Prompt Screen."
Advertisement
Table of Contents
