Entering The Access Number - Minolta EP3050 Operator's Manual

Entering the Access Number

Please input your 4-digit Access
Code #, then press the ACCESS Key.
Access #
Using the 10-Key Pad, enter the 4-digit
1
access number and press the Access
Mode Key.
1 2 3
4 5 6
7 8 9
0 C
NOTE
To correct the 4-digit access number
entered, first press the Clear Key, then
enter the new number.
The Touch Panel changes from the
"Access #" prompt to initial screen,
indicating that the access mode has
been canceled. A copy cycle can now
be started. Make your copies as
necessary.
Auxiliary Finishing
Ready to copy.
Auto Expo. x1.000
Exposure
1134P334CA
1134P438DA
1134P438DA
Orig. Copy
Basics
1
Auto Paper
Zoom Paper
1134P488CA
5. Turning ON and OFF, and Resetting the Copier
If an access number has been set, the number
assigned for your own department must be
entered before you can make a copy.
When the copy cycle is completed,
2
press the Access Mode Key again.
The Display changes from the normal
to the "Access #" prompt screen.
Please input your 4-digit Access
Code #, then press the ACCESS Key.
NOTE
See the User's Choice to set an access
number. p. 125
27
1134P439DA
1134P439DA
Access #
1134P334CA