What Does Each Message Mean - Minolta CF 9001 User Manual

When a Message Appears
6.7

What Does Each Message Mean?

Message
Please call tech. service.
code: XXXXX
Input your 4-digit Access
Code Number, and press
OK.
Please insert the Key
Counter.
Load paper in the XXXXX
Tray.
Please add XXXX Toner.
Follow the label inside the
front door.
The Staple Cartridge is
empty. Please replace with a
new one.
Misfeeding is detected.
Please remove paper at
The section indicated by ➜ is
open. Please close it
properly.
The Fuser Oil has run out.
Please call your technical
rep.
The Fuser Oil has run out.
Please replenish.
Toner Collecting Bottle is
nearly full.
Please call your tech. rep.
Copies remain in the Duplex
Unit.
Press START to feed them
out.
Sorter has reached its
capacity.
Please remove all copies
from bins first.
CF9001
Cause
The copier malfunctioned
and is unable to make
copies.
An access number has been
set and the number assigned
for your own department
must be entered before you
can make a copy.
The key counter is not
plugged in and the copier is
unable to make copies.
The currently selected tray
has run out of paper.
Toner has run out and the
copier is unable to make
copies.
Toner is soon running out.
The staples have run out.
A misfeed has occurred and
. no copy cycle can be
initiated.
A copier door is left open or
an option is not attached
properly and the copier is
unable to make copies.
The fuser oil needs to be
replenished.
The fuser oil has run out and
the copier is unable to make
copies.
The toner collecting bottle is
full and the copier is unable
to make copies.
A copy or copies are left in
the duplex unit and the
copier is unable to make
copies.
Sorter has reached its
capacity.
Remove all copies from the
bins first.
Action
Call and inform your
Technical Representative of
the code being shown on the
touch panel.
Enter the 4-digit access
number. ("Access Number",
see page 2-15)
Plug in the key counter.
Load the tray with paper, see
page 6-2.
Replenish toner,
see page 6-5.
Replace the staple cartridge
with a new one,
see page 6-8.
Clear the misfed sheet of
paper, see page 6-11.
Close the door or cover and
attach the option properly.
Please call your technical
representative.
Please replenish the fuser
oil, see page 6-19.
Please call your technical
representative.
Press the Start key to
remove all copies from the
duplex unit.
Remove all copies from the
sorter bins.
6-25
6