What Does Each Message Mean - Minolta EP3050 Operator's Manual

158

7. What Does Each Message Mean?

Message
A malfunction was detected. Call
your Technical Rep. and provide
the code.
Please input your 4-digit Access
Code #, then press the ACCESS
Key.
To begin copying, please insert the
Plug-In Counter as illustrated
below:
To begin copying, please insert the
Magnetic Card into Data Controller
as illustrated below:
The current Paper Drawer is
empty. Please reload.
Please add toner (MT Toner
401B): Follow the procedure on
the label inside the Front Door.
Replenish Toner
The Staple Cartridge is empty.
Please replace.
Misfeed detected. Remove misfeed
at O.
The section indicated by
Please close it properly.
Preventive Maintenance Time. Call
your Technical Rep. and provide
the code.
Maintenance Time.
Copies have been left in the
Duplex Unit. Please remove before
proceeding:
Sorter has reached its capacity.
Please remove all copies before
proceeding:
Originals have been left on the
glass. Please lift the cover and
remove the originals:
Cause
The copier malfunctioned and is
unable to make copies.
An access number has been set and
the number assigned for your own
department must be entered before
you can make a copy.
The Plug-In Counter is not plugged
in and the copier is unable to make
copies.
A magnetic card is not inserted
into Data Controller D-102 and the
copier is unable to make copies.
The currently selected Drawer has
run out of paper.
Toner has run out and the copier is
unable to make copies.
Toner is soon running out.
The staples have run out.
A misfeed has occurred and no
copy cycle can be initiated.
is open. A copier door is left open or an
option is not attached properly and
the copier is unable to make copies.
The time has come when the copier
needs service and the copier is
unable to make copies.
The time has come when the copier
needs service.
A copy or copies are left in the
Duplex Unit and the copier is
unable to make copies.
The Sorter Bin capacity has been
reached and the copier is unable to
make copies.
You try to use the AFR-9 when
there is an original left on the
Original Glass.
Action
Call and inform your Technical
Representative of the code being
shown on the Touch Panel.
Enter the 4-digit access number.
("Entering the Access Number"
p. 27)
Plug in the Plug-In Counter.
Insert a magnetic card into D-102.
Load the Drawer with paper. ("1.
When the Message 'The current
Paper Drawer is empty.' Appears"
p. 130)
Replace the Toner Bottle. ("2.
When the Message 'Replenish
Toner.' Appears" p. 136)
Replace the Toner Bottle. ("2.
When the Message 'Replenish
Toner.' Appears" p. 136)
Replace the Staple Cartridge with a
new one. ("3. When the Message
'The Staple Cartridge is empty.'
Appears" p. 138)
Clear the misfed sheet of paper.
("4. When the Message 'Misfeed
detected.' Appears" p. 142)
Close the door or cover and attach
the option properly. ("5. When the
Message 'The section indicated by
is open.' Appears" p. 154)
Call and inform the Technical
Representative of the code being
shown on the Touch Panel.
Call your Technical Representative.
Remove all copies from the Duplex
Unit.
Remove all copies from the Sorter
Bins.
First remove the original from the
Glass, then load the originals in the
AFR-9.