Table of Contents
Advertisement
5
To set the "Output Tray" function (optional)
This function is used to specify how copies and computer printouts are separated
and which output tray they are assigned to.
Tip
[Output Tray] only appears if the finisher or the job separator is installed.
1
Press the [Utility] key.
2
Touch [User Set], and then touch [User's Choice].
3
Touch [5/6], and then touch
[Output Tray].
4
Touch [Recept Print] or [Copier/
Printer], and then touch [Enter].
❍
To specify the output tray for
received faxes, touch [Recept
Print].
❍
To specify the output tray for
copies and computer printouts,
touch [Copier/Printer].
Tip
If you use the optional multi
port, you can specify output bins for each port.
5-26
5.3 Changing Default Settings
Di2010f/Di2510f/Di3010f/Di3510f
Advertisement
Table of Contents
