Copier (Multi Bypass Tray) - Minolta EP2080 Operator's Manual

Copier (Multi Bypass Tray)

Unload the stack of paper from the
1
Multi Bypass Tray.
Open the Front Door. Turn the Lock
2
Release Lever counterclockwise to
unlock and swing up the Upper Half of
the copier. Then lock Stopper M2 .
Remove any sheet of paper from the
3
transport section.
4. When the Message "A paper misfeed has been detected." Appears
Slightly lift up the Upper Half of the
4
copier and unlock Stopper M2 .
Gently swing down and lock the Upper
Half of the copier. Then, close the
Front Door.
Fan the paper thoroughly and reload it
5
on the Multi Bypass Tray.
115