Universal Repeater Mode Status Screen - ZyXEL Communications NBG4615 User Manual

Chapter 11 Universal Repeater Mode
Note: The Universal Repeater mode IP address is always the same as the Access Point
mode IP address. If you changed the IP address of your NBG4615 while in Access
Point mode, use this IP address in Universal Repeater mode.
When you select Universal Repeater Mode, the following pop-up message window appears.
9
Figure 54 Pop up for Universal Repeater mode
Click OK. The Web Configurator refreshes once the change to Universal Repeater mode is
successful.

11.5 Universal Repeater Mode Status Screen

Click to open the status screen.
Figure 55 Status: Universal Repeater Mode
84
NBG4615 User's Guide