Configuring Security Settings Of Multiple Ssids - ZyXEL Communications NBG4615 User Manual

Chapter 14 Tutorials
For example, you may set up three wireless networks (A, B and C) in your office. A is for workers,
B is for guests and C is specific to a VoIP device in the meeting room.

14.4.1 Configuring Security Settings of Multiple SSIDs

The NBG4615 is in access point mode by default. If you want to use multiple SSIDs when the
NBG4615 is in universal repeater mode, see
universal repeater mode.
This example shows you how to configure the SSIDs with the following parameters on your
NBG4615 (in access point mode).
SSID
SSID_Worker
SSID_Guest
SSID_VoIP
Connect your computer to the LAN port of the NBG4615 using an Ethernet cable.
1
The default IP address of the NBG4615 is "192.168.1.2". In this case, your computer must have an
2
IP address in the range between "192.168.1.3" and "192.168.1.254".
Click Start > Run on your computer in Windows. Type "cmd" in the dialog box. Enter "ipconfig" to
3
show your computer's IP address. If your computer's IP address is not in the correct range then see
Appendix D on page 259
After you've set your computer's IP address, open a web browser such as Internet Explorer and
4
type "http://192.168.1.2" as the web address in your web browser.
112
A
SSID_Worker
B
SSID_Guest
SECURITY TYPE KEY
WPA2-PSK DoNotStealMyWirelessNet
work
WPA Compatible
Static WEP 128bit keyexample123
WPA-PSK VoIPOnly12345678
for information on changing your computer's IP address.
C
SSID_VoIP
Chapter 11 on page 82 for how to set the NBG4615 to
MAC FILTERING
Disable
Disable
Allow
00:A0:C5:01:23:45
NBG4615 User's Guide