ZyXEL Communications NBG4615 User Manual page 73

Table 30 Navigation Panel: Router Mode (continued)
LINK
Wireless LAN
IPv6
WAN
LAN
DHCP Server
NAT
DDNS
Static Route
RIP
Security
Firewall
Content Filter
Management
NBG4615 User's Guide
TAB FUNCTION
General Use this screen to configure wireless LAN.
Security Use this screen to configure the level of wireless security for the
NBG4615.
MAC Filter Use the MAC filter screen to configure the NBG4615 to block
access to devices or block the devices from accessing the
NBG4615.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service
(WMM QoS). WMM QoS allows you to prioritize wireless traffic
according to the delivery requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
WDS Use this screen to set up Wireless Distribution System (WDS) on
your NBG4615.
IPv6 Use this screen to set the IPv6 settings for your NBG4615.
Internet This screen allows you to configure ISP parameters, WAN IP
Connection address assignment, DNS servers and the WAN MAC address.
Advanced Use this screen to configure other advanced properties.
IGMP Use this screen to enable IGMP snooping if you have LAN users
Snooping that subscribe to multicast services.
IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to have the NBG4615 apply IP alias to create LAN
subnets.
General Use this screen to enable the NBG4615's DHCP server.
Advanced Use this screen to assign IP addresses to specific individual
computers based on their MAC addresses and to have DNS
servers assigned by the DHCP server.
General Use this screen to enable NAT.
Application Use this screen to configure servers behind the NBG4615.
Advanced Use this screen to change your NBG4615's port triggering
settings.
General Use this screen to set up dynamic DNS.
IP Static Use this screen to configure IP static routes.
Route
RIP Use this screen to enable RIPv1 or RIPv2, which are LAN
broadcast protocols.
General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
Content Filter Use this screen to block certain web features and sites containing
certain keywords in the URL.
Chapter 9 Router Mode
73