Chapter 10 Access Point Mode
10.4 AP Mode Status Screen
Click
to open the Status screen.
Figure 49 Status Screen: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 31 Status Screen: Access Point Mode
LABEL
Logout
Device Information
Host Name
Firmware Version
Sys OP Mode
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP
WLAN Information
78
DESCRIPTION
Click this at any time to exit the Web Configurator.
This is the System Name you enter in the Maintenance > General screen. It is
for identification purposes.
This is the firmware version and the date created.
This is the device mode
(Section 7.1.2 on page
Access Point Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Client or None.
55) to which the NBG4615 is set -
NBG4615 User's Guide