ZyXEL Communications NBG4615 User Manual page 152

Chapter 17 WAN
This screen displays when you select Ethernet encapsulation.
Figure 96 Network > WAN > Internet Connection: Ethernet Encapsulation
The following table describes the labels in this screen.
Table 58 Network > WAN > Internet Connection: Ethernet Encapsulation
LABEL
ISP Parameters for Internet Access
Encapsulation
WAN IP Address Assignment
Get automatically
from ISP (Default)
Bigpond
Server
User Name
Password
Retype to
Confirm
152
DESCRIPTION
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Select this option If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Enable if you subscribe to Internet service from BigPond in Australia.
Then configure the fields below with the information provided.
Type the IP address of the BigPond server.
Type the user name given to you by your ISP. You can use alphanumeric and -
_@$./ characters, and it can be up to 31 characters long.
Type the password associated with the user name above. Use up to 64 ASCII
characters except [, ] and ?. This field can be blank.
Type your password again for confirmation.
NBG4615 User's Guide