Universal Repeater Mode Status Screen - ZyXEL Communications NBG4615 User Manual

Note: The Universal Repeater mode IP address is always the same as the Access Point
mode IP address. If you changed the IP address of your NBG4615 while in Access
Point mode, use this IP address in Universal Repeater mode.
When you select Universal Repeater Mode, the following pop-up message window appears.
9
Figure 55 Pop up for Universal Repeater mode
Click OK. The Web Configurator refreshes once the change to Universal Repeater mode is
successful.

11.5 Universal Repeater Mode Status Screen

Click to open the status screen.
Figure 56 Status: Universal Repeater Mode
NBG4615 User's Guide
Chapter 11 Universal Repeater Mode
83