ZyXEL Communications NBG4615 User Manual page 70

Chapter 9 Router Mode
Table 28 Status Screen Icon Key: Router Mode (continued)
ICON
The following table describes the labels shown in the Status screen.
Table 29 Status Screen: Router Mode
LABEL
Device Information
Host Name
Firmware Version
Sys OP Mode
WAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- Default Gateway
- DHCP
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP
WLAN Information
- WLAN OP Mode
- MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
70
DESCRIPTION
Click this icon to see the Status page. The information in this screen depends on the
device mode you select.
Click this icon to see the Monitor navigation menu.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
DESCRIPTION
This is the System Name you enter in the Maintenance > General screen. It is
for identification purposes.
This is the firmware version and the date created.
This is the device mode
Router Mode.
This shows the WAN Ethernet adapter MAC Address of your device.
This shows the WAN port's IP address.
This shows the WAN port's subnet mask.
This shows the WAN port's gateway IP address.
This shows the LAN port's DHCP role - Client or None.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Server or Disable.
This is the device mode
wireless LAN is set - Access Point Mode.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - ON or OFF.
This shows a descriptive name used to identify the NBG4615 in the wireless LAN.
This shows the channel number which you select manually.
This shows the channel number which the NBG4615 is currently using over the
wireless LAN.
This shows the level of wireless security the NBG4615 is using.
This shows the wireless standard.
This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
(Section 7.1.2 on page 55) to which the NBG4615 is set -
(Section 7.1.2 on page 55) to which the NBG4615's
NBG4615 User's Guide