Wpa(2)-Psk - ZyXEL Communications NBG4615 User Manual

Table 35 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP (continued)
LABEL
Apply
Cancel

11.6.3 WPA(2)-PSK

Figure 59 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
The following table describes the labels in this screen.
Table 36 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
LABEL
Universal Repeater Parameters
Enable
SSID
MAC Address
(Optional)
Security Mode
Encryption Type
Pre-Shared Key
Apply
Reset
NBG4615 User's Guide
DESCRIPTION
Click Apply to save your changes back to the NBG4615.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select this option to have the NBG4615 connect to the specified access point.
Enter the name of the access point to which you are connecting.
Enter the MAC address of the access point to which you are connecting.
Select WPA-PSK or WPA2-PSK if the access point to which you want to connect
uses WPA-PSK or WPA2-PSK.
Select the type of wireless encryption employed by the access point to which you
want to connect.
WPA-PSK or WPA2-PSK uses a simple common password for authentication.
Type the password employed by the access point to which you want to connect.
Click Apply to save your changes back to the NBG4615.
Click Reset to reload the previous configuration for this screen.
Chapter 11 Universal Repeater Mode
89