What You Can Do; What You Need To Know - ZyXEL Communications NBG4615 User Manual

Chapter 8 Easy Mode
Click Status to open the following screen.
Figure 31 Easy Mode: Status Screen
Go to
Network
Map
Screen

8.2 What You Can Do

You can do the following in this mode:
• Use this Navigation Panel to opt out of the Easy mode
• Use the Network Map screen to check if your NBG4615 can ping the gateway and whether it is
connected to the Internet
• Use the Control Panel to configure and enable NBG4615 features, including wireless security,
wireless scheduling and bandwidth management and so on
• Use the Status Screen to view read-only information about the NBG4615, including the WAN IP,
MAC Address of the NBG4615 and the firmware version

8.3 What You Need to Know

Between the different device modes, the Control Panel
depending on which features are applicable to the mode:
• Router Mode: All Control Panel features are available.
• Access Point Mode: Only Power Saving and Wireless Security are available.
• Universal Repeater Mode: Only Power Saving and Wireless Security are available.
• WISP Mode: The available features for this mode are Game Console, Content Filter,
Bandwidth MGMT, and Firewall.
• WISP + UR Mode: All Control Panel features are available.
58
Navigation Panel
Status Screen
Control Panel
(Section 8.5 on page
(Section 8.4 on page
59).
(Section 8.6 on page
(Section 8.7 on page
(Section 8.6 on page
59).
60).
67).
60) changes
NBG4615 User's Guide