Resetting The Nbg4615; How To Use The Reset Button - ZyXEL Communications NBG4615 User Manual

5.3 Resetting the NBG4615

If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the NBG4615 to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password
will be reset to "1234" and the IP address will be reset to "192.168.1.1".

5.3.1 How to Use the RESET Button

Make sure the power LED is on.
1
Press the RESET button for longer than 1 second to restart/reboot the NBG4615.
2
Press the RESET button for longer than 5 seconds to set the NBG4615 back to its factory-default
3
configurations.
NBG4615 User's Guide
Chapter 5 Introducing the Web Configurator
47