26.1 Overview
This chapter contains information about configuring bandwidth management and editing rules.
ZyXEL's Bandwidth Management allows you to specify bandwidth management rules based on an
application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device (B). Bandwidth
management is applied before sending the packets out to the WAN. Downlink traffic comes back
from the WAN device (B) to the LAN device (A). Bandwidth management is applied before sending
the traffic out to LAN.
Figure 123 Bandwidth Management Example
A
You can allocate specific amounts of bandwidth capacity (bandwidth budgets) to individual
applications (like VoIP, Web, FTP, and E-mail for example).
26.2 What You Can Do
• Use the General screen to enable bandwidth management and assign bandwidth values
26.4 on page
• Use the Advanced screen to configure bandwidth managements rule for the pre-defined services
and applications
• Use the Monitor screen to view the amount of network bandwidth that applications running in
the network are using
NBG4615 User's Guide
Bandwidth Management
-> VOIP
-> FTP
-> HTTP
-> Chat, Email
196).
(Section 26.5 on page
(Section 26.6 on page
C
HAPTER
B
196).
201).
2 6
(Section
195