The Menus - ZyXEL Communications NBG4615 User Manual

The following table describes the icons in this window.
Table 2 ZyXEL NetUSB Share Center Utility Main Window Icons
ICON

3.2.1 The Menus

This section describes the utility's menus.
Figure 3 ZyXEL NetUSB Share Center Utility Menus
NBG4615 User's Guide
DESCRIPTION
Configure Server
Click to open the NBG4615's built-in Web Configurator, which you can use to
set up the NBG4615 (see Chapter 5 on page 43
Auto-Connect Printer
You can set the selected printer to 'auto-connect' after you have connected it
to your computer during inital connection. If the printer is auto-connected to
your computer, they will always be connected over the network. You do not
need to configure it manually each time.
Note: If the computer is connecting to the shared USB printer for the first time,
you need to click Connect and setup the printer before you can use the
Auto-Connect Printer function. See
details.
Note: You first must install the appropriate drivers for the printer that you intend
to use.
Connect
Select a USB device and then click this button to connect to it. Your computer
can connect to as many USB devices as are connected to the NBG4615.
Disconnect
Select a device to which your computer is connected and then click this
button to disconnect from it.
Request to Connect
Some USB devices may not allow automatic connections over the network. If
so, select the device in question and click this button to issue a request to
connect to it.
Network Scanner
Click this to open the scanner options on your computer for working with a
scanner connected to the network.
Chapter 3 ZyXEL NetUSB Share Center Utility
for details).
Chapter 14 on page 121 for more
27