Chapter 27 Remote Management
27.3 WWW Screen
To change your NBG4615's remote management settings, click Management > Remote
Management > WWW.
Figure 129 Management > Remote Management > WWW
The following table describes the labels in this screen.
Table 83 Management > Remote Management > WWW
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Cancel
204
DESCRIPTION
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the
NBG4615 using this service.
Select All to allow all computes to access the NBG4615.
Otherwise, check Selected and specify the IP address of the computer
that can access the NBG4615.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
NBG4615 User's Guide