Lan Screen - ZyXEL Communications NBG4615 User Manual

Chapter 10 Access Point Mode
10.4.0.1 Navigation Panel
Use the menu in the navigation panel to configure NBG4615 features in Access Point mode.
The following screen and table show the features you can configure in Access Point mode.
Figure 50 Menu: Access Point Mode
Refer to Table 30 on page 72

10.5 LAN Screen

Use this section to configure your LAN settings while in Access Point mode.
Click Network > LAN to see the screen below.
Note: If you change the IP address of the NBG4615 in the screen below, you will need to
log into the NBG4615 again using the new IP address.
Figure 51 Network > LAN > IP
80
for descriptions of the labels shown in the Navigation panel.
NBG4615 User's Guide