ZyXEL Communications NBG4615 User Manual page 74

Chapter 9 Router Mode
Table 30 Navigation Panel: Router Mode (continued)
LINK
Bandwidth
Management
Remote
Management
UPnP
MAINTENANCE
General
Password
Time
Firmware
Upgrade
Backup/
Restore
Reset/
Restart
Sys OP Mode
74
TAB FUNCTION
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a
bandwidth management rule.
Monitor Use this screen to view the amount of network bandwidth that
applications running in the network are using.
WWW Use this screen to be able to access the NBG4615 from the LAN,
WAN or both.
General Use this screen to enable UPnP on the NBG4615.
General Use this screen to view and change administrative settings such
as system and domain names.
Password Use this screen to change the password of your NBG4615.
Setup
Time Setting Use this screen to change your NBG4615's time and date.
Firmware Use this screen to upload firmware to your NBG4615.
Upgrade
Backup/ Use this screen to backup and restore the configuration or reset
Restore the factory defaults to your NBG4615.
Restart This screen allows you to reboot the NBG4615 without turning the
power off.
Sys OP Mode This screen allows you to select whether your device acts as a
Router or a Access Point.
NBG4615 User's Guide