ZyXEL Communications NBG4615 User Manual page 28

Chapter 3 ZyXEL NetUSB Share Center Utility
The following table describes the menus in this screen.
Table 3 ZyXEL NetUSB Share Center Utility Main Screen Menus
MENU
System
Tools
Help
Auto-Connect
Printer
28
ITEM
Exit
Configuration
Auto-Connect Printer List
About
Set Auto-Connect Printer
Delete Auto-Connect Printer
DESCRIPTION
This closes the ZyXEL NetUSB Share Center
Utility.
This opens the ZyXEL NetUSB Share Center
Utility configuration window.
This opens the list window that displays all
of the printing devices connected to the
NBG4615.
This opens the about window, which
provides information of the utility software
and driver versions.
You can set the selected printer to 'auto-
connect' after you have connected it to your
computer during inital connection. If the
printer is auto-connected to your computer,
they will always be connected over the
network. You do not need to configure it
manually each time.
Click this to show your installed printer list
and select the one you want to set as auto-
connected.
Note: If the computer is connecting to the
shared USB printer for the first time,
you need to click Connect and setup
the printer before you can use the
Auto-Connect Printer function. See
Chapter 14 on page 121
details.
Note: You first must install the appropriate
drivers for the printer that you intend
to use.
This removes the auto-connect option from
the selected printer.
for more
NBG4615 User's Guide