Resetting The Nbg-418N V2 - ZyXEL Communications NBG-418N v2 User Manual

Chapter 2 The Web Configurator
Fig ure 6 Selecting the setup mode
2.3 Re se tting the NBG - 418N v2
If you forget your password or IP address, or you cannot access the Web Configurator, you will need to
WPS/ RESET
use the button at the back of the NBG-418N v2 to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the username will be
reset to a dm in and password will be reset to 1234 . The IP address will be reset to "192.168.1.1".
Make sure the power LED is on and press the WPS/ RESET button for longer than 10 seconds to restart/
reboot and set the NBG-418N v2 back to its factory-default configurations.
NBG-418N v2 User's Guide
18