Ways To Manage The Lte3301; Good Habits For Managing The Lte3301; Resetting The Lte3301; How To Use The Reset Button - ZyXEL Communications LTE3301 Series User Manual

1.3 Wa ys to Ma na g e the L T E3301
Use any of the following methods to manage the LTE3301.
• WPS (Wi-Fi Protected Setup). You can use the WPS button or the WPS section of the Web Configurator
to set up a wireless network with your LTE3301.
• Web Configurator. This is recommended for everyday management of the LTE3301 using a
(supported) web browser.
1.4 G o o d Ha b its fo r Ma na g ing the L T E3301
Do the following things regularly to make the LTE3301 more secure and to manage the LTE3301 more
effectively.
• Change the password. Use a password that's not easy to guess and that consists of different types of
characters, such as numbers and letters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). See
Restoring an earlier working configuration may be useful if the device becomes unstable or even
crashes. If you forget your password, you will have to reset the LTE3301 to its factory default settings. If
you backed up an earlier configuration file, you would not have to totally re-configure the LTE3301.
You could simply restore your last configuration.
1.5 Re se tting the L T E3301
If you forget your password or IP address, or you cannot access the Web Configurator, you will need to
use the
RESET
means that you will lose all configurations that you had previously saved, the password will be reset to
"1234" (see
1.5.1 Ho w to Use the RESET Butto n
Make sure the power LED is on.
1
Press the
2
RESET
Press the
3
RESET
configurations.
1.6 T he WPS Butto n
Your LTE3301 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.
Chapter 1 Introduction
button at the back of the LTE3301 to reload the factory-default configuration file. This
Section 20.4 on page 126) and the IP address will be reset to "192.168.1.1".
button for one to four seconds to restart/reboot the LTE3301.
button for longer than ten seconds to set the LTE3301 back to its factory-default
LTE3301 Series User's Guide
12
Section 20.7 on page 130.