Bandwidth Management
21.1 Overview
This chapter contains information about configuring bandwidth management and editing rules.
ZyXEL's Bandwidth Management allows you to specify bandwidth management rules based on an
application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device (B). Bandwidth
management is applied before sending the packets out to the WAN. Downlink traffic comes back from
the WAN device (B) to the LAN device (A). Bandwidth management is applied before sending the
traffic out to LAN.
Figure 92 Bandwidth Management Example
You can allocate specific amounts of bandwidth capacity (bandwidth budgets) to individual
applications (like VoIP, Web, FTP, and E-mail for example).
21.2 What You Can Do
• Use the General screen to enable bandwidth management and assign bandwidth values
21.4 on page
• Use the Advanced screen to configure bandwidth managements rule for the services and
applications
Chapter 21 Bandwidth Management
147).
(Section 21.5 on page
148).
LTE5366 Series User's Guide
C
H A P T E R
146
21
(Section