Bandwidth Management
19.1 Overview
This chapter contains information about configuring bandwidth management and editing rules.
ZyXEL's Bandwidth Management allows you to specify bandwidth management rules based on an
application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device (B). Bandwidth
management is applied before sending the packets out to the WAN. Downlink traffic comes back from
the WAN device (B) to the LAN device (A). Bandwidth management is applied before sending the
traffic out to LAN.
Figure 81 Bandwidth Management Example
You can allocate specific amounts of bandwidth capacity (bandwidth budgets) to individual
applications (like VoIP, Web, FTP, and E-mail for example).
19.2 What You Can Do
• Use the General screen to enable bandwidth management and assign bandwidth values
19.4 on page
• Use the Advanced screen to configure bandwidth managements rule for the services and
applications
19.3 What You Need To Know
The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN)
must be less than or equal to the upstream bandwidth that you configure in the Bandwidth
Management > General screen
120).
(Section 19.5 on page
120).
(Section 19.5 on page
LTE3301-M209 User's Guide
C
H A P T E R
120).
119
19
(Section