Configuring Security Settings Of Multiple Ssids - ZyXEL Communications LTE5366 Series User Manual

For example, you may set up three wireless networks (A, B and C) in your office. A is for workers, B is for
guests and C is specific to a VoIP device in the meeting room.

4.4.1 Configuring Security Settings of Multiple SSIDs

The LTE5366 is in router mode by default.
This example shows you how to configure the SSIDs with the following parameters on your LTE5366 .
SSID
Zyxel_Worker
Zyxel_VoIP
Zyxel_Guest
Connect your computer to the LAN port of the LTE5366 using an Ethernet cable.
1
The default IP address of the LTE5366is "192.168.1.1". In this case, your computer must have an IP address
2
in the range between "192.168.1.2" and "192.168.1.254".
Click Start > Run on your computer in Windows. Type "cmd" in the dialog box. Enter "ipconfig" to show
3
your computer's IP address. If your computer's IP address is not in the correct range then see
C on page 189
After you've set your computer's IP address, open a web browser such as Internet Explorer and type
4
"http://192.168.1.1" as the web address in your web browser.
Enter "admin" as the user name and "1234" (default) as the password and click Login.
5
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
6
Go to Configuration > Network > Wireless LAN > More AP. Click the Edit icon of the first entry to configure
7
wireless and security settings for SSID_Worker.
Chapter 4 Tutorials
SECURITY TYPE
WPA2-PSK
WPA Compatible
WPA-PSK
WPA-PSK
for information on changing your computer's IP address.
LTE5366 Series User's Guide
KEY
DoNotStealMyWirelessNetwork
VoIPOnly12345678
keyexample123
41
Appendix