Basic Queue-Based Printing Over Ip - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual
Notes:

Basic Queue-based printing over IP

Installing the
AXIS 5570e/AXIS
5670e
• You cannot type or edit the name manually.
• Make sure that you have PSERVER.NLM running if you selected Remote
Printer Mode in step 8.
10. If you want to define a remote printer number slot manually, check
the Manual box and type the desired number in the box.
11. Click the OK button to return to the Network Environments
window.
Axis print servers with software version 6.0 or later allow users to
print in a Pure IP environment using traditional queue-based printing
(which usually uses the IPX transport protocol). Note that only NDS
queue-based printing is supported.
In the NetWare Pure IP environment, you must use the NetWare
Administrator to create the printer, print server and queue objects.
Follow the instructions below to install the AXIS 5570e/AXIS 5670e
in the NetWare Pure IP environment:
1. Start the Configuration Wizard from the User mode in the AXIS
5570e/AXIS 5670e Web interface.
2. Click your way through the Wizard until reaching the NetWare
page.
Section 7: Setting Up - NetWare
153