Axis 5570e User Manual page 145

AXIS 5570e/AXIS 5670e User's Manual
Install a printer with
AXIS IPP Gateway
Configuration Snapin
5. Map the next available drive (e.g. G:) to the root of volume SYS on
your NetWare server.
From the temporary directory where axisIPP-snap-in.zip has been
unzipped, run the batch file AxisIPP.bat (default G:).
If the drive G: is not available, you have to edit the batch file and
change the drive to next available one.
Check that each line in the batch file is executed without failure.
6. Restart Tomcat and the NetWare Enterprise Web Server on the file
server by executing the following commands:
Type "TOMCAT33" <Enter>
Type "NVXADMUP" <Enter>
Type "NSWEB" <Enter.
7. Access the iManager web page on the NetWare server by opening
the following URL:
https://<IP address of NW server>:2200/eMFrame/iManager.html
You have to authenticate.
8. Click on iPrint Management on the left pane and select Create
Printer.
9. On the right pane, verify that the newly installed AXIS IPP Gateway
Configuration is under the Gateway type drop-down menu.
If not, it may be necessary to restart the NetWare server.
Now you are ready to use the AXIS IPP Gateway Configuration for
installing iPrint printers. You have to have Administrator rights to
install the printers through iPrint.
1. Use an AXIS 5570e/AXIS 5670e and connect a printer to
whatever port you want.
2. Connect the print server to the network.
3. Connect the power supply.
4. Start both the printers and the print server.
5. Log in as Admin.
Section 7: Setting Up - NetWare
145