Adding Netbios/Netbeui Printers In Windows 2000 Using Axis Print Monitor - Axis 5570e User Manual

116
Section 6: Setting Up - Windows

Adding NetBIOS/NetBEUI Printers in Windows 2000 using AXIS Print Monitor

See to it that the NetBEUI protocol is installed on your client. Follow
the procedure below to install Axis Printer Ports from a Windows
2000 workstation:
1. To start the Add Printer Wizard, select Settings | Printers from
the Start menu and double-click the Add Printer icon. Start the
installation by clicking Next.
2. The Wizard asks you to select Local printer or Network printer.
Select Local printer. Click Next.
3. Click Create a new port. In the Available Ports dialog, select AXIS
Port and click Next.
4. Select NetBIOS/NetBEUI as your choice of network protocol and
click OK.
5. Select the AXIS Port you want to add from the list of available ports.
The port appears as <name>.<port> (Example: AX100086.LP1). The
<port> is taken from the table below. Click OK.
Ports
available
AXIS 5570e USB1
AXIS 5670e LPT1
6. Choose the appropriate printer driver for your printer. Click Next
and proceed directly to step 9. It is only necessary to perform steps
7 - 8 if your printer does not appear in the list.
Note:
Even if the desired printer is available in the Manufacturers and Printers lists,
you are advised to use the printer driver provided with the printer. This assures
you of the latest driver software.
AXIS 5570e/AXIS 5670e User's Manual
USB port Parallel port
LPT1
LPT2
Serial port
—
COM1