Using Axis Thinwizard For Print Server Management - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual

Using AXIS ThinWizard for Print Server Management

Installing AXIS
ThinWizard
Important:
Starting AXIS
ThinWizard
Section 10: Management and Configuration
AXIS ThinWizard software allows you to manage and upgrade
multiple Axis products. Using a standard Web browser, you can find,
install, monitor, configure and upgrade your Axis print servers
remotely in any TCP/IP network. AXIS Thin Wizard 3.0 is Windows
2000 and Windows XP compatible.
AXIS ThinWizard software is available on www.axis.com
You should only install AXIS ThinWizard on a designated computer on
your network.
To install, follow the instructions given by the Installation Wizard.
During the installation, you will be asked to enter a user id and a
password — these will be used when logging in to AXIS ThinWizard,
so please take a note of them.
• To use all AXIS ThinWizard features, the print server must have the
FTP_ENB. parameter set to "Yes". This is done in the print server's web
interface: Admin | Network Settings | Detailed view | TCP/IP
• If you disable SNMP in the Print server's web interface, you will disable
AXIS ThinWizard's ability to determine print server status!
Enabling/Disabling SNMP is done from Admin | Network Settings |
Detailed view | SNMP
Follow the instructions below to start AXIS ThinWizard:
1. Make sure that the computer where you installed the AXIS
ThinWizard is up and running on your network.
2. Start a Web browser on a client in your network.
3. Enter the IP address or the host name of the computer where you
installed AXIS ThinWizard. (If the server is installed on another port
than 80, you must enter the port name after the host name or the
IP address).
189