Axis 5570e User Manual page 163

AXIS 5570e/AXIS 5670e User's Manual
Setting Parameters
Example:
Important:
In AppleTalk, you can change a limited number of the parameters of
the AXIS 5570e/AXIS 5670e. You can:
• enable and disable binary data transfers for your printing
• select the type of binary transfer protocol to use
• specify the AppleTalk printer type
• set the IP address
However, by assigning an IP address to your print server, you have
access to all of the print server parameters via any standard Web
browser or via FTP. Refer to Section 8 Print Server Management, on
page 85 for more information.
The following example describes how you set the print server
parameters in AppleTalk.
DO NOT use the parameter values from this example when configuring your
print server. You should select values that are appropriate for your printers and
network settings.
Follow the instructions below:
1. Open the Chooser from the Apple menu.
2. Select a network printer driver — any LaserWriter will do.
3. Select the printer port ending with _CFG.
4. Close the Chooser.
5. Open a text editor, e.g. SimpleText.
6. Write a text file containing the parameters you want to set:
BINARY_TYPE_1.
INT_ADDR.
ATYPE_1.
Section 8: Setting Up - Macintosh
:BCP
:192.168.3.191
:EPSONLQ2
163