Basic Queue-Based Printing Over Ip - Axis 5570e User Manual

AXIS 5570e and AXIS 5670e User's Guide
If the printer is not in the displayed print list, click Manually specify the print server and
enter the <IPX External Network Number> in the Network field.
Enter the <Print Server's HW address> in the LAN HW address field.
Choose a port in the Print Server Port field: e.g. LPT1.
The valid values for the port numbers are USB1, LPT1, LPT2 and COM1.
15. Click Finish.
16. Next, select the printer drivers for each client operating system. (Windows XP, Windows
2000, Windows NT4 and Windows 98). These drivers will be automatically downloaded to
users' workstations when they install this printer in the future.
17. Click Continue and OK in the next NDPS window. Your printer will appear as an NDS object in
the Directory Tree and will offer a full range of network security options.

Basic Queue-based printing over IP

Axis print servers with software version 6.0 or later allow users to print in a Pure IP environment
using traditional queue-based printing (which usually uses the IPX transport protocol). Note that
only NDS queue-based printing is supported.
In the NetWare Pure IP environment, you must use the NetWare Administrator to create the
printer, print server and queue objects.
Installing the AXIS 5570e/AXIS 5670e
Follow the instructions below to install the AXIS 5570e/AXIS 5670e in the NetWare Pure IP
environment:
1. Start the Configuration Wizard for General Setup from the User mode in the AXIS
5570e/AXIS 5670e Web interface.
2. Click your way through the Wizard until reaching the NetWare page.
3. Set the parameters on the NetWare page:
• PSERVER NDS Tree (example: NW5TREE)
or
PSERVER NDS File Server: (example: FILESERVERNAME)
• PSERVER NDS Distinguished Name:
(example: AXISXXXXXX.<context>, where <context> is the container where you want to
create your print server
4. Finish the Wizard.
49