Axis 5570e User Manual page 144

144
Section 7: Setting Up - NetWare
Installing AXIS IPP
Configuration Snap-
in for NetWare 6.0
When you install Service Pack 6 (16 April 2003) for NetWare 5.1 or
later and Service Pack 3 (16 April 2003) for NetWare 6.0 or later, the
AXIS LPR Gateway Configuration will automatically be installed and
configured on the NetWare Servers and ready for use.
The AXIS IPP Gateway Configuration Snap-in for NetWare 6.0 can be
downloaded for free from www.axis.com. Follow the instructions
below to install the AXIS IPP Gateway Configuration Snap-in for
NetWare 6.0, if you want to add it in your iPrint environment.
1. Download the free axisIPP-snap-in.zip file from www.axis.com
Gateway
and unzip it in a temporary directory.
2. Make sure the the NetWare Enterprise Web Server was previously
installed on the server. Otherwise, install it.
3. Novell iPrint uses the NDPS infrastructure, so make sure that all the
NDPS requirements have been met:
• Make sure that the BROKER.NLM is loaded. If it isn't, type
LOAD BROKER in the server console prompt and select the
name of the Broker.
• Make sure that the NDPS Manager object is created in the
Novell Directory Services (NDS) tree. Refer to your Novell
documentation for creating this object.
• Make sure that the NDPSM.NLM is loaded. If it isn't, type
LOAD NDPSM in the server console prompt and select the
appropriate NDPS Manager.
4. Shutdown Tomcat and the NetWare Enterprise Web Server on the
NetWare file server by executing the following commands:
Type "NSWEBDN" <Enter>
Type "TOMCAT33 -STOP" <Enter>
Type "NVXADMDN" <Enter>
AXIS 5570e/AXIS 5670e User's Manual