Axis 5570e User Manual page 88

88
Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User's Manual
JES definitions
JES2 Initialization
When a TCP-attached printer is to be used with JES, it must be
defined for deferred-printing mode. To use a PSF printer for deferred
printing under JES, you must first code JES initialization statements
to define FSSs and FSAs for PSF printers. For JES2, the FSS is defined
by an statement, and the FSA is defined by a
FSS
For JES3, the FSS is defined by an
defined by a
The maximum number of FSSs and FSAs that are supported are:
• FSSs = 2000
• FSAs per FSS = 64
The actual number of FSAs per FSS depends on several factors like:
• The virtual region size below the 16-megabyte line
• The number and the size of form definitions and page definitions
• The number of buffers specified (
printers
• The block sizes of the font, page segment, overlay, form defini-
tion, and page definition libraries
The example below shows a sample JES2 statements for a TCP/IP-
attached AXIS 5570e/AXIS 5670e:
FSS (FSS1) PROC=SAMPPROC,HASPFSSM=HASPFSSM
PRT1
Note:
This is only an example. For specific coding for JES parameters, refer to the JES
publication for the level of JES you are using.
statement.
DEVICE
FSS=FSS1,MODE=FSS,PRMODE=(LINE,PAGE,),
CLASS=C,UCS=0,SEP=NO,SEPDS=NO,CKPTPAGE=100
START=YES,MARK=NO,TRKCELL=YES
PRTnnnn
statement, and the FSA is
FSSDEF
) for channel-attached
BUFNO
statement.