Ppr/Ppd Printing - Ipds Data Streams - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual

PPR/PPD Printing - IPDS data streams

Note:
Before you begin
Configuring the
AS/400 Host System
Creating a PSF
Configuration
IPDS is only available for AXIS 5570e/AXIS 5670e models with the IPDS option
installed. For more information, refer to Product Model Summary, on page 9.
The configuration procedures presented in this section are divided
into three separate steps:
• Configuring the AS/400 host
• Configuring the AXIS 5570e/AXIS 5670e
• Verifying the communication between the AXIS 5570e/AXIS
5670e and the AS/400
Make sure that the AS/400 host is running OS/400 V3R6 or higher
with TCP/IP support installed and configured.
Make sure that the latest PTFs are installed. Information about which
PTFs to use can be obtained from:
http://as400service.rochester.ibm.com/
When configuring the AS/400 host system you can:
• create a PSF configuration
• create a printer device description
The system uses default values but you can optionally create a PSF
configuration by following the instructions below:
1. Issue the command CRTPSFCFG.
2. Press F11 to display keywords.
Section 4: Setting Up - AS/400 (iSeries)
51